QV12DA合格させる問題集でQlikView24時間で試験合格できます
最新問題を使おうQV12DA試験問題と解答でPDFで一年間無料更新
QV12DA試験は、40問の選択式問題から構成され、最長2時間以内で解答する必要があります。このテストは、QlikView 12ソフトウェアを用いたデータ管理に関する多岐にわたるトピックをカバーしており、データモデリング、データベース設計、データ変換、データ統合、データ可視化が含まれます。試験に合格するためには、受験者は少なくとも70％のスコアを得る必要があります。
QlikView 12 データアーキテクト認定は、データアーキテクチャとQlikView 12の専門知識を持つプロフェッショナルが、自分自身を職場で差別化し、新しいキャリアの機会を開くための優れた方法です。適切な準備と献身により、誰でもQV12DAの試験に合格して、認定されたQlikView 12データアーキテクトになることができます。
QlikView 12データアーキテクト認定（QV12DA）は、QlikView 12プラットフォームでデータアーキテクチャを扱うプロフェッショナル向けの認定試験です。この試験は、データモデリング、データ可視化、およびデータ変換などの分野で、プロフェッショナルのスキルと知識をテストするために設計されています。QV12DA試験に合格することで、認定されたQlikView 12データアーキテクトとして認められ、この分野の専門知識を証明することができます。
質問 # 23
Refer to the exhibit.
End users report they cannot access the AccessPoint. The system administrator tries to fix the issue and realizes no QlikView services have started When the administrator tries to manually start the services, the error message shown in the exhibit is displayed What is the likely cause of this error?
- A. The QlikView services account password has expired
- B. The QlikView server license has expired
- C. The QlikView Publisher license has expired
- D. The UserDocs folder is Read Only
正解：A
質問 # 24
A system administrator finds this error message in the event log file
500 Warning WorkingSet: Virtual Memory is growing beyond parameters - 22.761(22.393) GB Which is the cause of the error?
- A. QlikView Server memory is above the Cache limit for the Working Set
- B. QlikView Server memory is below the Low limit for the Working Set
- C. QlikView Server memory is above the Low limit for the Working Set
- D. QlikView Server memory is above the High limit for the Working Set
正解：D
質問 # 25
A system administrator needs to open a support case for an issue related to QlikView Distribution Service task failures. The administrator gathers the appropriate QlikView document and task log files for support staff to analyze.
What additional information should the administrator provide for support staff to ensure optimum response and resolution time?
- A. Example QlikView documents
- B. Meta files related to the failing QlikView documents
- C. Example QlikView data files (QVDs)
- D. QlikView system information
正解：A
質問 # 26
In order to enable Unbalanced QlikView Server Clustering which two tiles must be edited? (Select two )
- A. C:\ProgramData\QlikTech\QlikViewServer\Settings ini
- B. C:\ProgramData\QlikTech\QlikViewServer\Cluster\Settings mi
- C. C:\Program Files\QlikView\Server\Web Server\Settings.ini
- D. C:\Program Files\QlikView\Management Service\Settings ini
- E. C:\ProgramFiles\QlikView\Web\Settings ini
正解：C、D
質問 # 27
A developer requests access to an API to execute reloads from external software The developer is using NTFS security to authorize against the system Which two steps should a system administrator complete to provide the developer with the appropriate permissions? (Select two.)
- A. Turn off the firewall on the server with the QlikView Management Service
- B. Add the developer to the QlikView Administrators local security group on the server with the QlikView Management Service
- C. Ensure the developer,s document can access the QlikView Management Service on TCP port 4799 if a firewall is configured
- D. Add the developer to the QlikView Management API local security group on the server with the QlikView Management Service
- E. Ensure the QlikView Management Service runs in DMS mode and the developer,s username and password are correct
正解：C、D
質問 # 28
Financial managers need to analyze their monthly data on the first day of the following month. However, NOT all of the transactions are entered into the source system on time.
When the managers look at the data later in the month, the results no longer match data from the first of the month. The managers need to be able see both views of the data.
Which two data modeling techniques can be used to meet the requirements?
(Select two.)
Response:
- A. Load only the late transactions in another application
- B. Create a second application that only loads on the first day of every month
- C. Create a field to identify the on time and late transactions
- D. Use a bookmark to show the view of the first day of the month
- E. Create a QVD to show a snapshot of the data from the first of the month
正解：C、E
質問 # 29
A system administrator needs to evaluate the CAL utilization in their organization Which tool should the administrator use?
- A. The CALs tab in the QMC
- B. The Governance Dashboard
- C. The QVS Statistic^ window in the QMC
- D. The License Monitor application
正解：A
質問 # 30
A company has three QlikView developers who lease QlikView Desktop licenses from QlikView Server, two business analysts who access five QlikView documents on a daily basis, and a supervisor who accesses a specific QlikView document every day.
Which CALs should be assigned to meet these requirements?
- A. 2 Named User CALs, 3 Document CALs and 1 Session CAL
- B. 5 Named User CALs and 1 Document CAL
- C. 3 Named User CALs and 10 Document CALs
- D. 3 Named User CALs, 2 Document CALs and 1 Session CAL
正解：D
質問 # 31
Users report that the data in several QlikView documents failed to refresh A system administrator needs to determine what is causing the reload failures.
Which log files should the administrator check?
- A. QlikView task and distribution log files
- B. QlikView distribution service and management service log files
- C. QlikView session and performance log files
- D. QlikView workorder and load balancer log files
正解：B
質問 # 32
A system administrator needs to create a QlikView Publisher task that triggers the execution of a Windows batch file on successful reload of a QlikView document.
Which task should the administrator create?
- A. A Loop and Reduce task
- B. An External Program Supporting task
- C. An Event Driven Execution (EDX) triggered task
- D. A Reload only task
正解：C
質問 # 33
An organization needs all employees lo have access to data in a QlikView document for the country in which employees are located. The deployment only has a Reload Engine.
What should the system administrator do?
- A. Set up dynamic data reduction with Section Access in the QlikView document
- B. Configure file permissions to support data reduction
- C. Add the Active Directory groups for the countries to the file permissions of the QlikView document
- D. Configure a Loop and Reduce task to put the files in a specific folder
正解：A
質問 # 34
A business user reports a summary dashboard sheet takes a long time to load. Other sheets perform well. Which should be the first step for a data architect to identify the source of the problem?
Response:
- A. Review the Sheet Properties > Objects tab to identify the calculation time and memory use of each object
- B. Run a series of tests and use a timer to capture the time that the sheet takes to render each time it is opened
- C. Review the settings for each object in the summary dashboard sheet to identify complex calculations
- D. Review the Sheet Properties > Performance tab to identify errors and issues with the sheet and/or objects
正解：A
質問 # 35
An organization plans to purchase CALs for a new QlikView Server
Users are grouped into three categories based on how they will access and use QlikView
1. Two hundred and twenty users access a single application infrequently for short periods of time with a maximum of five concurrent users.
2. Five users work standard business hours and have access to four QlikView documents, each with a maximum of five concurrent users.
3. Two users are developers and only work on one QlikView document at a time. The developers must be able to use the Qlikview Desktop Client for development and the AccessPoint for testing.
Which is the most cost effective CAL configuration to meet the requirements?
- A. 220 Document CALs and 7 Named CALs
- B. 10 Session CALs and 2 Document CALs
- C. 5 Session CALs and 7 Named CALs
- D. 227 Named CALs
正解：C
質問 # 36
A user needs access to a QlikView document for which security is controlled using Section Access.
A system administrator adds the user to the data source that is loaded into the Section Access table of the QlikView document.
However the user is still unable to access the QlikView document.
What should the administrator do?
- A. Reload and distribute the QlikView document
- B. Add the user to the QlikView Administrators group
- C. Restart the QlikView Directory Services Connector service
- D. Create a task configured to reduce the data and then distribute the QlikView document to the user
正解：D
質問 # 37
There is a QlikView document with separate "City" and "State" fields A system administrator needs to create separate QVW documents each with a singular "City and State" field.
Which method should the system administrator use?
- A. Loop and reduce by "City" only
- B. Concatenate "City" and "State" then loop and reduce by "City and State"
- C. Loop and reduce by "City and State"
- D. Concatenate "City" and "State" then loop and reduce by "City and State" bookmark
正解：A
質問 # 38
A system administrator wants to configure a SAN folder to store User Documents. The administrator wants to use NTFS to allow all users access to the QlikView documents.
Which permission should the administrator grant on the SAN folder?
- A. Read & execute
- B. Execute
- C. Write
- D. Allow
正解：A
質問 # 39
Which three are required to configure a clustered QlikView Server deployment? (Select three )
- A. A clustered QlikView Server license key
- B. The same QlikView Server version build number
- C. A shared storage location on the same network subnet for Root folder
- D. Identical hardware resources for CPU and RAM
- E. A clustered QlikView Publisher license key
正解：A、B、C
質問 # 40
A QlikView server environment is restarted multiple limes. The system administrator finds this message in the QlikView Server event logs:
Restart: Server aborted trying to recover by restart. Reason for restart: Phoenix detected: Performance monitor stuck.
Which are three possible causes for this error? (Select three )
- A. File locking
- B. Corruption in performance counter library
- C. Lack of permission
- D. Corrupt PGO files
- E. Memory shortage
正解：B、C、E
質問 # 41
Business users report QlikView documents are having intermittent performance issues Users sometimes receive warnings related to memory. The system administrator finds this error message in the server log files: WorkingSet: Virtual Memory is growing beyond parameters Which three steps should the administrator take to diagnose and fix this issue? (Select three.)
- A. Review the Working Set High/Low values for QlikView Server in the QlikView Management Console
- B. Ask the document owner to optimize the data model and memory usage of sheet objects in the document
- C. Monitor the memory usage on the server that runs the QlikView Server services, and increase memory resources if needed
- D. Increase the amount of free disk space on the server that runs the QlikView Server services
- E. Ask the user to restart the client and/or browser, and try again
正解：A、B、C
質問 # 42
A sales manager wants a bar chart showing a distribution of the deals displayed in $250 intervals of the profit margin. Which dimension and expression should a data architect use?
Response:
- A. Dimension: =OrderIDExpression: =Class (Margin, 250, ,Margin, )
- B. Dimension: =class (Margin, 250, ,Margin, )Expression: =Count (DISTINCT OrderlD)
- C. Dimension: =class (OrderID, 250, ,Margin, )Expression: =Count (DISTINCT OrderlD)
- D. Dimension: =Aggr (Sum (Margin) ,OrderID) )Expression: =Count (DISTINCT OrderlD)
正解：B
質問 # 43
......
最新問題をダウンロードQV12DA問題集で2025年最新のQV12DA試験問題集：https://www.passtest.jp/QlikView/QV12DA-shiken.html
最新のQlikView QV12DA認定練習テスト問題：https://drive.google.com/open?id=1Choo0qENzN4EAB09jD-WrCEPUgpEQqjA