あなたを合格させるDC0-200お手軽に試験合格リアルDC0-200練習問題集で更新されたのは2025年05月04日
2025年最新の実際に出ると確認されたで無料Dell DC0-200試験問題
Dell DC0-200 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
質問 # 30
How would you install Red Hat Linux and Dell-validated drivers for your factory-installed hardware using the Dell Server Assistant CD?
- A. boot the Dell Server Assistant CD and have the Red Hat Linux CDs available
- B. boot to the Dell Server Assistant CD after installing Red Hat Linux
- C. autorun the CD from the GUI after Red Hat Linux is installed
- D. use the Dell Server Assistant CD to create a Utility Partition and launch the installation from the Utility Partition.
正解：A
質問 # 31
Which is the appropriate method to change or migrate from RAID-5 to RAID-0 using Array Manager with an Adaptec PERC?
- A. Switch RAID Type
- B. Rebuild Array
- C. Rearrange Virtual Disk
- D. Reconfigure
正解：D
質問 # 32
Which visual clue alerts you that a virtual disk requires a signature to be written to it?
- A. A yellow "bang" appears on the virtual disk.
- B. A green plus sign appears on the virtual disk.
- C. A blue plus sign appears on the virtual disk.
- D. A red dot with a minus sign appears on the virtual disk.
正解：D
質問 # 33
What is the intended mounting location for a 0U rack mount device in a Dell rack?
- A. in any of the 42U spaces available
- B. on the back doors of the rack
- C. in the mounting holes in the side walls of the rack
- D. at the top of the rack
正解：C
質問 # 34
You are attempting to install OMSA on a system. The only option offered by the installation GUI is Management Station. What are the two most likely causes for this? (Choose two.)
- A. You are attempting to install OMSA on a non-supported Dell PowerEdge server.
- B. You are attempting to install OMSA from a network-shared CD-ROM drive.
- C. You are attempting to install OMSA from the management station CD-ROM.
- D. You are attempting to install OMSA on a non-PowerEdge Dell system.
正解：A、D
質問 # 35
What is the maximum number of primary partitions allowed by Array Manager for three disk arrays?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
質問 # 36
Which two Dell servers are rack dense optimized? (Choose two.)
- A. PowerEdge 1600SC
- B. PowerEdge 1655MC
- C. PowerEdge 1750
- D. PowerEdge 2600
正解：B、C
解説：
Explanation/Reference:
Explanation:
質問 # 37
Which statement is true about using the Save feature of BASP?
- A. It is used to install and configure the Broadcom Ethernet Controller driver.
- B. It saves a configuration as an executable file.
- C. It lets you transfer teaming configurations to other servers.
- D. It is only available in Windows 2000.
正解：C
質問 # 38
Which two operations can be performed with the DSA CD? (Choose two.)
- A. change the Dell Service Tag via the Service Tag Utility
- B. run system diagnostics on your server
- C. create NetWare 5.1/6.0 driver/utilities diskette(s)
- D. create Windows 2000 driver/utilities diskette(s)
正解：C、D
解説：
Explanation/Reference:
Explanation:
質問 # 39
What does 2 +1 mean in the system specifications for the power subsystem?
- A. The server must have two power supplies in order to operate and a third power supply is the redundant supply.
- B. The server must have one power supply in order to operate and the two additional power supplies are redundant.
- C. The server has two power supplies with one AC input fed to both, providing redundant power supplies.
- D. The server has two AC inputs that are switched to a single supply to provide redundant AC sources.
正解：A
質問 # 40
Which key sequence is used to access the Adaptec PERC BIOS Configuration Utility during boot up?
- A. CTRL + ALT + DEL
- B. CTRL + C
- C. CTRL + M
- D. CRTL + A
正解：D
質問 # 41
A disk in a RAID 5 array has failed. Using Array Manager, which statement is true about rebuilding the data onto a replacement drive if a PERC 3/DC is in use?
- A. The rebuild operation will start automatically upon insertion of the replacement disk.
- B. The replacement disk must be initialized after insertion.
- C. The rebuild operation will start only after it is manually initiated.
- D. The replacement disk must be initialized before insertion.
正解：A
質問 # 42
What is the purpose of the battery on a PERC?
- A. preserves the hard drive configuration
- B. maintains the PERC BIOS settings
- C. saves the cache contents during a power loss
- D. provides power to the PERC controller
正解：C
質問 # 43
Which action would you take to convert a 1x6 backplane to a 2x3?
- A. install an interposer board
- B. attach a daughter card
- C. install a power distribution board
- D. add a second SCSI controller card
正解：B
質問 # 44
You can obtain the Dell Utility Partition in which two ways? (Choose two.)
- A. Download the install file from www.dell.com.
- B. It can be installed from the OpenManage Documentation CD.
- C. It can be installed from the DSA CD before an OS is installed.
- D. It is included on the hard drive from the factory.
正解：C、D
質問 # 45
Which three components make up the RAID enabler kit for ROMB servers? (Choose three.)
- A. RAID cable
- B. cache battery
- C. cache memory
- D. RAID backplane
- E. RAID key
正解：B、C、E
質問 # 46
You want to install Windows 2000 Server and Dell-validated drivers for your factory-installed devices using the Dell Server Assistant CD. From which location should you launch the Dell Server Assistant?
- A. boot to the Dell Server Assistant CD and have your Windows CD available
- B. boot to the Dell Server Assistant CD after installing Windows 2000
- C. use the Dell Server Assistant to create a Utility Partition and launch the installation from the Utility Partition
- D. autorun the CD from the Windows desktop after installing Windows 2000
正解：A
解説：
Explanation/Reference:
Explanation:
質問 # 47
You have the PowerEdge server running Red Hat Linux Advanced Server Operating System. You want to be able to accomplish the following: -- report health of all system components -- change System Reset Timer value under the Auto Recovery tab -- save Command Log under the Logs tab -- set the Beep Speaker on the Server Alert Action under Alert Management tab -- view details in About box Which two access privileges allow you to accomplish these tasks? (Choose two.)
- A. root user
- B. administrator user
- C. any valid user
- D. any valid user with root privileges
正解：A、D
解説：
Explanation/Reference:
Explanation:
質問 # 48
Which four steps are necessary for creating a team in Windows 2000 using BASP? (Choose four.)
- A. create a team and assign it a name
- B. enter the path and filename of the configuration to be saved
- C. select the Broadcom Advanced Server Program Driver
- D. configure the IP address and subnet mask for the team
- E. set the media type for the adapters
- F. select the adapters from the list to add to the team
正解：A、C、D、F
質問 # 49
Click the Exhibit button. In Red Hat Linux, which network command produces the o utput shown in the exhibit ?
- A. ipconfig
- B. netstat -s
- C. netconfig -r
- D. ifconfig -a
正解：D
質問 # 50
What is the purpose of the battery on a PERC?
- A. preserves the hard drive configuration
- B. maintains the PERC BIOS settings
- C. saves the cache contents during a power loss
- D. provides power to the PERC controller
正解：C
解説：
Explanation/Reference:
Explanation:
質問 # 51
Which two functions does the Manage Containers option allow in the Adaptec PERC BIOS Utility? (Choose two.)
- A. view the status of a container
- B. initialize individual drives
- C. delete containers
- D. create a new container
正解：A、C
質問 # 52
......
DC0-200リアル試験問題解答は無料：https://www.passtest.jp/Dell/DC0-200-shiken.html
DC0-200試験問題、リアルDC0-200練習問題集：https://drive.google.com/open?id=1Vp8fn8R_o6MdQ-m8Me4_ngRO6DHkfHHo