無料セールまもなく終了！100%有効DC0-200試験問題集に120問題と解答が待ってます
検証済みDC0-200問題集と解答であなたを合格確定させるDell Certification試験解答！
質問 # 50
Using Array Manager, what must you do when changing the drive letter of one of your volumes? (Choose two.)
- A. You must find if there are program(s) installed on that volume, because changing the drive letter might render the program(s) in-executable.
- B. First you must ensure the drive letter has been removed by selecting the Remove option. The drive letter cannot be changed.
- C. You must ensure the volume does not contain the boot volume.
- D. You must ensure you are using Microsoft Windows 2000 operating system because drive letters cannot be changed using Microsoft Windows NT 4.0.
正解：A、C
解説：
Explanation/Reference:
Explanation:
質問 # 51
Which visual clue alerts you that a virtual disk requires a signature to be written to it?
- A. A yellow "bang" appears on the virtual disk.
- B. A red dot with a minus sign appears on the virtual disk.
- C. A blue plus sign appears on the virtual disk.
- D. A green plus sign appears on the virtual disk.
正解：B
解説：
Explanation/Reference:
Explanation:
質問 # 52
You have just installed W2K on your server and you cannot get the server to see your local network. What can you do to diagnose network connectivity? (Choose three.)
- A. verify that the subnet address is the same as the rest of the working devices on your LAN
- B. verify that the server is configured to use DNS
- C. verify that the cable plugged into your server is not a cross-over cable
- D. verify that if attached to a switch and using VLANs, your port is in the proper configuration
正解：A、C、D
質問 # 53
Which statement is true about using the Save feature of BASP?
- A. It lets you transfer teaming configurations to other servers.
- B. It is used to install and configure the Broadcom Ethernet Controller driver.
- C. It is only available in Windows 2000.
- D. It saves a configuration as an executable file.
正解：A
解説：
Explanation/Reference:
Explanation:
質問 # 54
The system administrator notices the Dell badge on the front of the server is flashing orange on the PowerEdge 2650. What utility should the system administrator load to determine the cause of the flashing diagnostic indicator?
- A. OpenManage Server Administrator
- B. OpenManage Array Manager
- C. Dell Server Assistant
- D. Dell Client Configuration Utility
正解：A
質問 # 55
Which two components can be installed in the 0U space found in Dell racks? (Choose two)
- A. Dell PDU
- B. Dell UPS
- C. Dell flat panel monitor
- D. Dell Dual-Power Grid Switch
正解：A、D
解説：
Explanation/Reference:
Explanation:
質問 # 56
You are attempting to install OMSA on a system. The only option offered by the installation GUI is Management Station. What are the two most likely causes for this? (Choose two.)
- A. You are attempting to install OMSA on a non-PowerEdge Dell system.
- B. You are attempting to install OMSA on a non-supported Dell PowerEdge server.
- C. You are attempting to install OMSA from the management station CD-ROM.
- D. You are attempting to install OMSA from a network-shared CD-ROM drive.
正解：A、B
質問 # 57
Why is memory interleaving used?
- A. to provide redundancy by allowing defective memory to be disabled
- B. to provide speed improvements by allowing addressing to be set for the next access to the same DIMM, while data are being read from the previous access
- C. to provide speed improvements by accessing memory in parallel
- D. to provide redundancy by maintaining parity information on the DRAM to detect and correct single bit errors
正解：C
質問 # 58
What is the maximum number of primary partitions allowed by Array Manager for three disk arrays?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
解説：
Explanation/Reference:
Explanation:
質問 # 59
Which visual clue alerts you that a virtual disk requires a signature to be written to it?
- A. A yellow "bang" appears on the virtual disk.
- B. A red dot with a minus sign appears on the virtual disk.
- C. A blue plus sign appears on the virtual disk.
- D. A green plus sign appears on the virtual disk.
正解：B
質問 # 60
What is the correct NIC teaming for the Intel Proprietary Method to accomplish load balancing?
- A. AFT
- B. ATF
- C. ALB
- D. SLB
正解：C
解説：
Explanation/Reference:
Explanation:
質問 # 61
Which three requirements must you meet to install OMSA in a Red Hat Linux environment? (Choose three.)
- A. The running kernel must have loadable module support enabled.
- B. The "ucd-snmp" or "net-snmp" package that is provided with the operating system must be installed.
- C. You must purchase the Linux version of OMSA.
- D. You must do a custom installation to support Linux.
- E. You must be logged in as root.
正解：A、B、E
解説：
Explanation/Reference:
Explanation:
質問 # 62
Which two functions does the Manage Containers option allow in the Adaptec PERC BIOS Utility? (Choose two.)
- A. create a new container
- B. delete containers
- C. view the status of a container
- D. initialize individual drives
正解：B、C
解説：
Explanation/Reference:
Explanation:
質問 # 63
Which three tasks can be accomplished using the System Setup Utility of a Dell PowerEdge Server? (Choose three.)
- A. change the boot order
- B. enable the SCSI/RAID controller
- C. change the Asset Tag information
- D. enable or disable all integrated devices in the system
正解：A、B、D
質問 # 64
What are the two default URLs for accessing OMSA on a remote server? (Choose two.)
- A. https://hostname:1311
- B. https://ipaddress:1311
- C. http://ipaddress:1311
- D. https://ipaddress:443
- E. http://hostname:1311
正解：A、B
質問 # 65
Which four steps are necessary for creating a team in Windows 2000 using BASP? (Choose four.)
- A. select the Broadcom Advanced Server Program Driver
- B. configure the IP address and subnet mask for the team
- C. select the adapters from the list to add to the team
- D. set the media type for the adapters
- E. enter the path and filename of the configuration to be saved
- F. create a team and assign it a name
正解：A、B、C、F
解説：
Explanation/Reference:
Explanation:
質問 # 66
You want to install Windows 2000 Server and Dell-validated drivers for your factory-installed devices using the Dell Server Assistant CD. From which location should you launch the Dell Server Assistant?
- A. boot to the Dell Server Assistant CD and have your Windows CD available
- B. autorun the CD from the Windows desktop after installing Windows 2000
- C. boot to the Dell Server Assistant CD after installing Windows 2000
- D. use the Dell Server Assistant to create a Utility Partition and launch the installation from the Utility Partition
正解：A
質問 # 67
Which keystroke is used to designate a single disk as a Hot Spare drive in the LSI Logic PERC controller?
- A. <Space Bar>
- B. <Insert>
- C. <F4>
- D. <F10>
正解：C
質問 # 68
OpenManage Server Administrator can determine the status of which two server components? (Choose two.)
- A. processor load
- B. network activity
- C. disk utilization
- D. fans
- E. memory
正解：D、E
質問 # 69
Which three tasks can be accomplished using the System Setup Utility of a Dell PowerEdge Server?
(Choose three.)
- A. change the boot order
- B. enable the SCSI/RAID controller
- C. change the Asset Tag information
- D. enable or disable all integrated devices in the system
正解：A、B、D
解説：
Explanation/Reference:
Explanation:
質問 # 70
What should you do before removing or reseating the RAID memory?
- A. remove the hard drives
- B. disconnect the RAID battery
- C. disconnect the RAID key
- D. disconnect the RAID cable
正解：B
解説：
Explanation/Reference:
Explanation:
質問 # 71
What is the intended mounting location for a 0U rack mount device in a Dell rack?
- A. in the mounting holes in the side walls of the rack
- B. on the back doors of the rack
- C. in any of the 42U spaces available
- D. at the top of the rack
正解：A
質問 # 72
......
DC0-200試験問題集で100%合格率DC0-200試験：https://www.passtest.jp/Dell/DC0-200-shiken.html
試験問題集リアルDell Certification問題集120問題と解答が待ってますを試そう：https://drive.google.com/open?id=1Vp8fn8R_o6MdQ-m8Me4_ngRO6DHkfHHo