最新版を今すぐ試そう！[2023年10月] 試験準備には欠かさない！S1000-007問題集
有能な受験者がシミュレーション済みのS1000-007試験PDF問題を試そう
IBM S1000-007認定試験は、挑戦的で広範な準備を必要とします。候補者は、IBM AIX v7管理における実践的な経験を持ち、その基礎的な概念を深く理解していることが期待されています。この試験は、候補者がその知識を実世界のシナリオに適用する能力をテストするように設計されており、IBM AIX管理のキャリアを進めたいITプロフェッショナルにとって優れた資格です。
IBM S1000-007（IBM AIX v7 Administrator Specialty）試験は、IBM AIXオペレーティングシステムと作業する個人の知識とスキルをテストするよう設計されています。 AIXは、多くのハイエンドサーバーやワークステーションで使用されるUnixベースのオペレーティングシステムです。この試験は、複雑なAIX環境でのインストール、構成、トラブルシューティング、およびメンテナンスなど、さまざまなタスクを実行できるかどうかを評価するために設計されています。
質問 # 15
Which command will show when a file was last accessed?
- A. who -f file
- B. Is -1 file
- C. istat file
- D. fsdb file
正解：C
解説：
The istat command displays information about the inode of a file, including the last access time. This command is available on IBM AIX v7 systems and is documented in the IBM AIX v7 Administrator Specialty Study Guide. The syntax for the command is "istat file", where 'file' is the path to the file you would like to check. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds2/istat.htm.
質問 # 16
An administrator checks the IBM Fix Level Recommendation Tool (FLRT) for their system to see if they need to update IBM firmware or software.
The tool asks for their current system firmware level. How can the administrator confirm what it is?
- A. run lsattr -1 firmware0
- B. run lsattr -El sys0 Igrep mcode
- C. run lsmcode -A
- D. run lscfg -vl sys0
正解：A
質問 # 17
One morning the application owner needed to urgently transfer some files using FTP from Development Dev_DB_Server to the production server - DB_Server, but is receiving the following error:
connect: Connection refused
Note: DB_Server-cannot be shutdown during business hours.
Checking the setup of DB_Serrver, the administrator finds the following entries in /etc/inetd.conf
The administrator also, finds the file /etc/ftpaccess . ctl doesn't exit.
Which two methods can be used to allow files to be transferred to DB Server using FTP?
- A. On DBServer run command startsrc -s ftpd and create /etc/ftpaccess-ctl with line "allow: *".
- B. On DB_Server run command startsrc -t ftp.
- C. On DB_Server uncomment line starting with "#ftp" and run refresh -s inetd.
- D. On DBServer run the command /usr/sbin/f tpd.
- E. On DB_Server uncomment line starting with "#f tp" in /etc/inetd.conf and reboot.
正解：C、E
質問 # 18
When configuring an LPAR profile, what is the meaning of CPU Entitlement?
- A. the number of logical CPUs allocated to an LPAR
- B. Simultaneous Multi Threading setting of an LPAR
- C. the count of virtual CPUs configured on an LPAR
- D. the amount of guaranteed CPU time allocated to an LPAR
正解：B
質問 # 19
When attempting to recover a corrupted file system an administrator runs the command fsck against the unmounted file system and receives the following error:
After confirming that the file system is not mounted, what should the administrator do next?
- A. Convert the log to INLINE.
- B. Run logform /dev/u1v11.
- C. Run fsck: with the -F (force) flag.
- D. Run logrcvr /dev/ulv14 .
正解：C
解説：
When attempting to recover a corrupted file system, the administrator should first confirm that the file system is not mounted. If the file system is not mounted, then the administrator should run the fsck command with the -F (force) flag. This will force the fsck command to check the file system for errors and attempt to fix them. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 8-23).
質問 # 20
A customer added paging space and needs to activate it automatically after the next reboot. Which command should the administrator issue?
- A. chps
- B. mkps
- C. swapon
- D. mklv
正解：B
解説：
The mkps command creates a paging space and activates it when the system is rebooted. This is explained in the IBM AIX v7 Administrator Specialty Study Guide, under the topic "Creating and Activating a Paging Space".
質問 # 21
A system administrator needs to open a console to an AIX virtual machine that is controlled by a Hardware Management Console (HMC). After connecting to the HMC using SSH, which command should the administrator run to open a console?
- A. mJcvdev
- B. mlcvterm
- C. mkrep
- D. oem_setup_env
正解：B
質問 # 22
While a system administrator is checking the TCP/IP connectivity between two systems with the traceroute command, the administrator found Fragmentation required messages in the traceroute output.
What is the likely reason for these messages?
- A. Same MTU sizes between the source and target systems. The source and target systems are using Jumbo Frames. The LPARs are using the same Virtual Switch (vSwitch) Network.
- B. Different MTU sizes between the source and target systems. The source system is using Jumbo Frames and the target is using the default MTU size.
- C. The TCP buffers between the source and the target systems are exhausted. The source and target systems are using virtual ethernet adapters.
- D. The TCP buffers in the router gateway are exhausted. The source and target system are having TCP/IP communication problems.
正解：B
解説：
The source system is using Jumbo Frames and the target is using the default MTU size. Fragmentation required messages can appear in traceroute output when the Maximum Transmission Unit (MTU) size of the source and target systems are different. In this case, the source system is using a larger MTU size (Jumbo Frames) than the target system (default MTU size). As a result, the router gateway must fragment the data packets in order for them to reach their destination. This is why the fragmentation required messages appear in the traceroute output. Reference: IBM AIX v7 Administrator Specialty Study Guide.
質問 # 23
A system administrator has noticed that static routes are missing after rebooting a system. What is the most likely reason for this?
- A. The administrator has failed to configure the routes in the inet0 device with the chdev command.
- B. The administrator has failed to run the cfgmgr command before rebooting the systems.
- C. The administrator has failed to configure the routes in the lo0 device with the chdev command.
- D. The administrator has failed to configure the routes with the route add command.
正解：A
質問 # 24
What are three states a device can have when connected to an AIX system?
- A. Stopped
- B. Blocked
- C. Suspended
- D. Running
- E. Available
- F. Defined
正解：A、E、F
解説：
Devices that are connected to the system can be in one of four states.
Devices that are connected to the system can be in one of the following states:
Item
Description
Undefined
The device is unknown to the system.
Defined
Specific information about the device is recorded in the customized database, but it is unavailable to the system.
Available
A defined device is coupled to the operating system, or the defined device is configured.
Stopped
The device is unavailable but remains known by its device driver.
If a tty device and a printer alternately use the same tty connector, both a tty device and a printer are defined on the same parent and port in the device configuration database. Only one of these devices can be configured at a time. When the tty connector is configured, the printer specific setup information is retained until it is configured again. The device is not removed; it is in the defined state. Maintaining a device in defined state retains customized information for a device that is not currently in use, either before it is first made available or while it is temporarily removed from the system.
If a device driver exists for a device, the device can be made available through the device driver.
https://www.ibm.com/docs/en/aix/7.2?topic=nodes-device-states
質問 # 25
An administrator starts an AIX LPAR and wants to monitor the boot process using the HMC console.
Which command in HMC SSH session lists all managed systems, LPARs on them and offers an easy way to open a console window to an AIX LPAR?
- A. lsrefcode
- B. mkvterm
- C. lssyscfg
- D. vtmenu
正解：B
質問 # 26
What is the effect of running the mount -a command?
- A. All JFS/JFS2 file systems are mounted.
- B. All automatic file systems are mounted.
- C. All file systems defined to the system are mounted
- D. Ail file systems set to mount=true are mounted.
正解：C
解説：
This command is used to mount all file systems defined in the /etc/filesystems file, as well as any file systems that have the mount=true attribute set in the /etc/filesystems file. According to the IBM AIX v7 Administrator Specialty Study Guide, "the mount -a command mounts all file systems specified in the /etc/filesystems file, including file systems with the mount=true parameter set. The mount -a command is normally issued at system startup or when a new file system is added to the system."
質問 # 27
While a system administrator is checking the TCP/IP connectivity between two systems with the traceroute command, the administrator found Fragmentation required messages in the traceroute output.
What is the likely reason for these messages?
- A. Same MTU sizes between the source and target systems. The source and target systems are using Jumbo Frames. The LPARs are using the same Virtual Switch (vSwitch) Network.
- B. Different MTU sizes between the source and target systems. The source system is using Jumbo Frames and the target is using the default MTU size.
- C. The TCP buffers between the source and the target systems are exhausted. The source and target systems are using virtual ethernet adapters.
- D. The TCP buffers in the router gateway are exhausted. The source and target system are having TCP/IP communication problems.
正解：B
質問 # 28
The administrator of an AIX NIM client system has accidentally removed the /etc/niminfo file. Which method is used to rebuild the /etc/niminfo file?
- A. Use the nimclient command to restore the /etc/niminfo file from the most recent mksysb backup image.
- B. Use the niminit command on the AIX client system to rebuild the /etc/niminfo file.
- C. Use the nimclient command on the AIX client system to rebuild the /etc/niminfo file.
- D. Use the rep command on the AIX client system to copy the /etc/niminfo file from the NIM master.
正解：B
解説：
The niminit command can be used to rebuild the /etc/niminfo file on an AIX NIM client system if it has been accidentally deleted. This command will read the NIM database on the NIM master and generate the /etc/niminfo file accordingly. Reference: IBM AIX v7 Administrator Specialty Study Guide.
質問 # 29
While trying to extend a file system named /work an administrator receives the following error. 0516-787 extendlv: Maximum allocation for logical volume fslv00 is 256.
What must be done to allow the file system to be extended?
- A. Change the logical volume type to jfs2 as JFS logical volumes cannot extend past 256.
- B. Increase the volume group's maximum limit of logical partitions per logical volume.
- C. Increase the setting for maximum number of logical partitions for that logical volume.
- D. Change the file system's maximum capacity.
正解：C
解説：
This error indicates that the maximum number of logical partitions for the logical volume is set to 256 and needs to be increased in order to allow the file system to be extended. From the IBM AIX v7 Administrator Specialty Study Guide: "The 0516-787 error indicates that the maximum number of logical partitions for the logical volume is set to 256, and needs to be increased in order to allow the file system to be extended."
質問 # 30
Which statement is true regarding the snap command?
- A. The data must be stored in /tmp.
- B. All options are enabled by default.
- C. It collects performance related data.
- D. By default, it will check there is enough space where the data is to be stored.
正解：C
質問 # 31
An administrator has configured NFS export in the /etc/exports file. Based on the following output, with which permissions has the /tmp directory been exported?
- A. no permissions
- B. read-write permissions
- C. read-only permissions
- D. write-only permissions
正解：B
質問 # 32
......
検証済み材料を使うならまずS1000-007テストエンジンを試そう：https://www.passtest.jp/IBM/S1000-007-shiken.html
合格するに必要な問題集はS1000-007試験：https://drive.google.com/open?id=1z7lVUcou9rkr5NMOIAYCwwd8uI8ez4PN