最適な練習法にはIBM S1000-007問題集で素晴らしいS1000-007試験問題PDF
更新された検証済みの合格させるS1000-007試験リアル問題と解答
IBM S1000-007 試験は、90分以内に62の多肢選択問題を解答する必要があります。試験はAIX v7システム管理、セキュリティ、パフォーマンスチューニング、トラブルシューティングなど、広範囲なトピックをカバーしています。試験に合格するには、少なくとも62問中57問（92％）の正解が必要です。英語と日本語で利用可能であり、世界中の任意のPearson VUEテストセンターで受験することができます。
質問 # 11
How are console log messages recorded by AIX?
- A. errdemon
- B. alog
- C. rsyslog
- D. syslog
正解：C
質問 # 12
A customer added paging space and needs to activate it automatically after the next reboot. Which command should the administrator issue?
- A. mklv
- B. mkps
- C. swapon
- D. chps
正解：D
質問 # 13
Which command lists filesets that are below AIX V7.2 technology level 4?
- A. lppchk: -L -F "fileset level" I grep -v "7200-04"
- B. instfix -i I grep -v 7200-04
- C. lslpp -s -1 7200-04
- D. oslevel -r -1 7200-04
正解：B
質問 # 14
When a user logs in. the processing of their .profile is very slow. Which issue could contribute to the problem?
- A. The user's home file system is full.
- B. The PATH variable contains non-existent directories.
- C. Network issues between the user location and the system.
- D. A slow NFS mount for their home directory.
正解：A
質問 # 15
Which command should be used to perform a graceful shutdown and reboot of an AIX LPAR?
- A. halt
- B. reboot
- C. shutdown
- D. bosboot
正解：C
解説：
The shutdown command is used to shut down a system in an orderly manner. When used with the '-Fr' option, it will perform a graceful shutdown and reboot of the LPAR. This command is available on IBM AIX v7 systems and is documented in the IBM AIX v7 Administrator Specialty Study Guide. The syntax for the command is "shutdown -Fr", where the '-F' option indicates that the system should be rebooted after shutdown and the '-r' option indicates that the system should be rebooted. For more information, please see the IBM documentation at https://www.ibm.com/support/knowledgecenter/ssw_aix_72/com.ibm.aix.cmds3/shutdown.htm.
質問 # 16
Which statement is true regarding the snap command?
- A. It collects performance related data.
- B. By default, it will check there is enough space where the data is to be stored.
- C. The data must be stored in /tmp.
- D. All options are enabled by default.
正解：B
解説：
"The command to limit root user access to only members of the group called system is chadmin group=system root. This command will set the primary group of the root user to the system group, thereby limiting root user access to only members of that group. This command can be used to set any user's primary group, not just root." The source of this information is the IBM AIX v7 Administrator Specialty Study Guide.
質問 # 17
An administrator finds that their development server has crashed and an error code 554 is displayed. They know that this error is typically associated with a problem executing varyon rootvg and they should boot from AIX Media to be able to perform maintenance tasks. When the administrator checks the crontab of the NIM server, they find that a mksysb image is created each night.
Can the administrator use this mlcsysb to boot the server and perform the required maintenance tasks?
- A. No, because they need to use the original AIX installation media for that server.
- B. No, because mksysb is not bootable.
- C. Yes, but they may need to create a spot first.
- D. Yes, but they may need to create a machine resource first.
正解：D
解説：
A mksysb image is a snapshot of the AIX operating system and its configuration, so it can be used to boot the server and perform the required maintenance tasks. However, in order to use the mksysb image, the administrator may need to create a machine resource in the NIM environment first. According to the IBM AIX v7 Administrator Specialty Study Guide (page 13-6), the mksysb image should be used in combination with a previously created machine resource, which defines the parameters for the installation.
質問 # 18
One morning the application owner needed to urgently transfer some files using FTP from Development Dev_DB_Server to the production server - DB_Server, but is receiving the following error:
connect: Connection refused
Note: DB_Server-cannot be shutdown during business hours.
Checking the setup of DB_Serrver, the administrator finds the following entries in /etc/inetd.conf
The administrator also, finds the file /etc/ftpaccess . ctl doesn't exit.
Which two methods can be used to allow files to be transferred to DB Server using FTP?
- A. On DBServer run the command /usr/sbin/f tpd.
- B. On DB_Server run command startsrc -t ftp.
- C. On DB_Server uncomment line starting with "#f tp" in /etc/inetd.conf and reboot.
- D. On DB_Server uncomment line starting with "#ftp" and run refresh -s inetd.
- E. On DBServer run command startsrc -s ftpd and create /etc/ftpaccess-ctl with line "allow: *".
正解：C、D
質問 # 19
What AIX feature will allow data to be mirrored to a remote site?
- A. Geographic Logical Volume Manager
- B. Remote Volume Groups
- C. Mirror Pools
- D. Asynchronous Dispersed Logical Volumes
正解：A
質問 # 20
An AIX administrator is struggling with installing RPM packages. When they try to install a package, errors appear that there are prerequisite RPMs that also need to be installed. Which tool can be used to simplify resolving these dependencies?
- A. yum
- B. rpm
- C. dpkg
- D. installp
正解：D
解説：
Installp is a command-line package management tool that is used in the AIX operating system to install, remove, and manage software packages. It simplifies the installation of RPM packages by automatically resolving any prerequisite dependencies and installing them before the main RPM package. This ensures that any prerequisites are installed and configured correctly before the main package is installed, reducing the time it takes to resolve installation issues. Reference: IBM AIX v7 Administrator Specialty Study Guide (page 9-10).
質問 # 21
What command is used to monitor SAN I/O performance/throughput?
- A. iostat -DIRT 60 10
- B. mpstat -w 1
- C. vmstat -i 1
- D. ioo -L
正解：A
解説：
The command used to monitor SAN I/O performance/throughput is iostat -DIRT 60 10. The iostat command is used to monitor I/O performance and throughput on a SAN device. The DIRT (Disk I/O Response Time) flag can be used to display the response time for each I/O request. The last two arguments, 60 and 10, are the interval (in seconds) and the number of iterations respectively. This command will monitor I/O performance/throughput every 60 seconds for 10 iterations.
質問 # 22
Which user account is always UID 0 on AIX?
- A. root
- B. system
- C. admin
- D. bin
正解：A
解説：
The root account is the special user in the /etc/passwd file with the user ID (UID) of 0 and is commonly given the user name, root. It is not the user name that makes the root account so special, but the UID value of 0. This means that any user that has a UID of 0 also has the same privileges as the root user. Also, the root account is always authenticated by means of the local security files.
https://www.ibm.com/docs/en/aix/7.2?topic=passwords-root-account
質問 # 23
A SAN administrator increased the size of a LUN device (hdisk) that is being used by a AIX LPAR. However, the system administrator does not see the new size using the lsvg or Ispv commands.
Which command updates the system with the new size?
- A. extendpv
- B. cfgmgr
- C. chvg -g
- D. synclvodm
正解：B
解説：
The cfgmgr command updates the system configuration database with the current configuration of the devices attached to the system. When the SAN administrator increases the size of a LUN device (hdisk), it is not automatically reflected on the AIX LPAR. Running the cfgmgr command updates the system with the new size information and makes it visible to the system administrator.
質問 # 24
Which command will show when a file was last accessed?
- A. Is -1 file
- B. fsdb file
- C. who -f file
- D. istat file
正解：D
質問 # 25
What is the effect of running the mount -a command?
- A. Ail file systems set to mount=true are mounted.
- B. All file systems defined to the system are mounted
- C. All JFS/JFS2 file systems are mounted.
- D. All automatic file systems are mounted.
正解：B
解説：
This command is used to mount all file systems defined in the /etc/filesystems file, as well as any file systems that have the mount=true attribute set in the /etc/filesystems file. According to the IBM AIX v7 Administrator Specialty Study Guide, "the mount -a command mounts all file systems specified in the /etc/filesystems file, including file systems with the mount=true parameter set. The mount -a command is normally issued at system startup or when a new file system is added to the system."
質問 # 26
What command is used to monitor SAN I/O performance/throughput?
- A. iostat -DIRT 60 10
- B. mpstat -w 1
- C. vmstat -i 1
- D. ioo -L
正解：A
質問 # 27
......
IBM S1000-007 試験は、IBM AIX v7管理に特化したITプロフェッショナルの知識やスキルをテストするために設計された認定試験です。この試験は、IBM AIX v7管理における専門知識を検証し、この分野でキャリアを進めたい個人を対象としています。試験の成功により、IBM AIX v7管理者スペシャリスト認定が得られます。
更新されたPDF（2023年最新）実際にあるIBM S1000-007試験問題：https://www.passtest.jp/IBM/S1000-007-shiken.html
問題集返金保証付きのS1000-007問題集公式問題集：https://drive.google.com/open?id=1t2vkYngXi87FM_jbOdkua2_oiQq3bDVa