結果を保証するには最新2025年05月無料Oracle 1z0-1118-23で練習しよう
有効な問題最新版を無料で試そう1z0-1118-23試験問題集解答
Oracle 1z0-1118-23 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
質問 # 26
Fusion Analytics Warehouse (FAW) allows you to select the Descriptive Flexfields (DFFs) you want to move to your data warehouse.
What setup must you ensure in your Fusion Application for FAW to perform this operation7
- A. Ensure that the DFFs and their attributes are Bl-enabled in your Fusion Application.
- B. Ensure the DFFs are configured and validated in your Fusion Application.
- C. Create a BICC extract for DFFs and schedule the same in your Fusion Application.
正解：A
解説：
Explanation
The DFFs and their attributes must be BI-enabled in order to be extracted by the FAW data pipeline and loaded into the data warehouse. BI-enabling a DFF means that it is exposed as a column in a view object that is part of a subject area in Oracle Transactional Business Intelligence (OTBI). This allows FAW to access the DFF data through OTBI web services.
Verified References: Use Descriptive Flexfields, section 23.1; About Flexfields, section "Use Flexfields in Your Data Model".
質問 # 27
You have created a fact, a dimension, and a new subject area using Data Augmentation.
You want to extend the dimension m your newly created subject area by adding new attribute data source.
What steps are required to achieve this?
- A. The dimensions created in Data Augmentation are not available in Semantic Model Extensions.
- B. Create a branch and add "Extend a Dimension''.
- C. The only available option is to modify your ADW custom schema and your Data Augmentation.
正解：B
解説：
Explanation
You can extend the dimension that you created using Data Augmentation by using Semantic Model Extensions. You need to create a branch and add a step of "Extend a Dimension". Youcan then select the dimension that you want to extend and add a new attribute data source from another table or view
質問 # 28
You have created your customization using Semantic Model Extensions. Now, you want to test your customization to ensure it meets your requirements.
What steps should you perform
- A. Publish all the branches.
- B. The customization appears automatically in your subject areas.
- C. Publish the branch that contains your customization.
正解：C
解説：
Explanation
To test your customization, you need to publish the branch that contains your customization. This will apply the changes to the model and make them available in the subject areas. You can then use OAC console to create and view reports based on your customized model3
質問 # 29
You have recently provisioned a new Fusion Analystics Warehouse (FAW) instance and want to enrich yourSubject Areas with Descriptive Flexfields (DFF).
In your custom application, you have created aDFF page and added/selected allthe required attributes. How would you activate them to enable data loading?
- A. After selecting the required attributes in the DFF custom application, you need to refresh the functional areas or wait for the next incremental upload for the DFFs to be visible in Subject Areas.
- B. Activating is a two-step process: first, you need to generate the DFF custom application, and second, you need to deploy for the DFFs to be visible in Subject Areas.
- C. After selecting the required attributes in the DFF custom application, you need to build a semantic model extension and wait for the next incremental upload for the DFFs to be visible in Subject Areas.
正解：B
解説：
Explanation
To enable data loading for descriptive flexfields (DFFs) in Fusion Analytics Warehouse (FAW), you need to follow a two-step process. First, you need to generate the DFF custom application by clicking the Generate button on the Data Augmentation page. This will create a custom application with the selected attributes from the DFF page. Second, you need to deploy the DFF custom application by clicking the Deploy button on the Data Augmentation page. This will deploy the custom application and make the DFFs visible in the subject areas
質問 # 30
You want to move external data to the Oracle Autonomous Data Warehouse that comes with FAW.
M4 Which facilities in FAW enable this?
- A. You must use an ETL that connects to ADW as there are no such facilities in FAW.
- B. The only available option is to use OCI Data Integration to move data.
- C. Use ''Manage Connections" to create a connection to available sources. Data Augmentation can be used against the connections to bring data into AC
正解：C
解説：
Explanation
To move external data to ADW that comes with FAW, you can use Manage Connections to create a connection to available sources, such as Oracle Database, Oracle Autonomous Database, Oracle Object Storage, Oracle Applications Cloud, and others4. Data Augmentation can then be used against these connections to bring data into ADW5. You can also use OAC Data Replication feature to replicate data from other sources into ADW6
質問 # 31
In the FAW Security framework, what purpose do the system groups (like FAW Licensed ERP Authorize and FAW Functional Administrator) help serve?
- A. They define job-specific roles for users.
- B. They giant a user access to FAW based on the system groups to which they are assigned.
- C. Duty and data roles are mapped to system groups before they are assigned to users.
正解：B
解説：
Explanation
The purpose of the system groups (like FAW Licensed ERP Authors and FAW Functional Administrator) in the FAW Security framework is to grant a user access to FAW based on the system groups to which they are assigned. System groups are predefined groups that specify the user's system permissions, such as whether they can consume, author, or administer content for a specific module5. System groups do not map duty and data roles or define job-specific roles for users. References: 5
質問 # 32
You want to do data validation for one of your critical metrics in FAW. However, you cannotmetric as part of predefined data validation.
How can you validate your metric?
- A. You have to do it manually. You need to create a report in OTB1 for that metric and then compare it with the value in FAW.
- B. This feature is not available yet. You must wait until FAW support that metric for data validation.
- C. You must open a ticket with Oracle support.
正解：A
解説：
Explanation
You need to create a report in OTBI for that metric and then compare it with the value in FAW. Explanation:
To validate your metric that is not part of the predefined data validation in FAW, you have to do it manually.
You need to create a report in OTBI for that metric and then compare it with the value in FAW. You can use the Data Validation workbook in FAW to view the details of the predefined data validation1. You do not need to wait for FAW to support that metric or open a ticket with Oracle support for this purpose
質問 # 33
You have a table in your custom schema in ADW and would like to create a dimension using Semantic Model Extensions.
Which Fact tables can you join your custom dimension to?
- A. You can join your custom dimension with custom Fact and out-of-the-box Fact tables.
- B. You can only join a custom dimension with a custom Fact table.
- C. Only degenerate dimensions are supported.
正解：A
解説：
Explanation
You can create a dimension using Semantic Model Extensions and join it with any Fact table, whether it is a custom Fact table or an out-of-the-box Fact table. You can also join multiple dimensions with a single Fact table3
質問 # 34
You noticed that the scheduled incremental data refresh has started.
What operations are disabled during the refresh?
- A. Ad hoc data refresh for functional areas are not possible while a scheduled data load is ongoing.
- B. FAW decks are disabled
- C. FAW subject areas are not accessible.
正解：A
解説：
Explanation
The operations that are disabled during the scheduled incremental data refresh are ad hoc data refresh for functional areas and semantic model extensions. You cannot perform an ad hoc data refresh for a functional area while a scheduled data load is ongoing, as this may cause conflicts or errors in the data pipeline3. You also cannot perform semantic model extensions while a scheduled data load is ongoing, as this may cause inconsistencies or corruption in the semantic model1. FAW subject areas and decks are not disabled during the refresh, but they may show outdated or incomplete data until the refresh is completed.
質問 # 35
In the FAW Security framework, which mapping paradigm best describes the mapping ofSecurity Content to Data Roles?
- A. Security Context to Data Role is many-to-many
- B. Security Context to Data Role is one-to-many
- C. Security Context to Data Role is one-to-one
正解：A
解説：
Explanation
The FAW Security framework allows a flexible and extensible mapping of Security Content to Data Roles. A Security Content is a predefined attribute that defines the boundaries of data access for a given subject area, such as Business Unit, Country, Department, Job Family, Legal Entity, and Worker Type. A Data Role is a custom role that grants access to specific subsets of data in the data warehouse based on the Security Content.
A Security Content can be mapped to multiple Data Roles, and a Data Role can have multiple Security Content associated with it. For example, a Security Content of Country = US can be mapped to a Data Role of US HR Manager, and a Data Role of US HR Manager can have multiple Security Content such as Country = US, Business Unit = Sales, and Department = Marketing.
Verified References: Reference for Fusion HCM Analytics, page 9-10.
質問 # 36
You have reviewed out-of-the-box data security through the configuration of context assignment.You need to create custom data security to meet your data security requirements.
Which FAW settings provide this functionality?
- A. You need to modify the Data Security Assignment file with the values you want for the users.
- B. The Security Configurations available in the Semantic Model Extensions through the FAW Console provide this functionality
- C. A combination of steps in Security Console and the Security Configurations in the Semantic Model Extensions available at the FAW Console provides this functionality.
正解：C
解説：
Explanation
To create custom data security to meet your data security requirements, you need a combination of steps in Security Console and the Security Configurations in the Semantic Model Extensions available at the FAW Console. The Security Console allows you to create custom data roles and assign them to users or groups5. The Security Configurations allow you to define custom security filters and apply them to dimensions, facts, or subject areas6. You do not need to use only the Security Configurations or modify the Data Security Assignment file for this purpose.
質問 # 37
You would like to avoid creating Fusion Applications users and their assigned job roles in FAW.
What options are available in FAW for synchronizing users and job roles between FAW and Fusion Applications?
- A. Use the Bulk Load option in FAW to do the synchronization.
- B. Implement SSO and synchronization of users and job roles between FAW and Fusion Applications, before provisioning the FAW instance.
- C. Use the FAW console security option to create and manage users and job roles.
正解：B
解説：
Explanation
The option that is available in FAW for synchronizing users and job roles between FAW and Fusion Applications is to implement SSO and synchronization of users and job roles between FAW and Fusion Applications, before provisioning the FAW instance. This will allow you to avoid creating Fusion Applications users and their assigned job roles in FAW, as they will be automatically synchronized from Fusion Applications4. You cannot use the FAW console security option or the Bulk Load option in FAW to do the synchronization.
質問 # 38
How many instances of Oracle Fusion Analytics Warehouse (FAW) can you create based on a standard subscription?
- A. One instance for production use.
- B. Number of instances Is based on the number of Fusion Application instances.
- C. Two instances: one for development/testing, and a second for production use.
正解：C
解説：
Explanation
Based on a standard subscription, you can create two instances of Oracle Fusion Analytics Warehouse: one for development/testing, and a second for production use. You can use the development/testing instance to test new features or customizations before deploying them to the production instance3
質問 # 39
Oracle Fusion Analytics Warehouse (FAW) offers certain functionality as preview features for you to try. You want to enable the preview features in your environment.
What would you do?
- A. Provision a new FAW instance
- B. Open a Support Request (SR) with Oracle support.
- C. Ask your FAW Service Administrator to enable the preview features in your existing FAW instant
正解：C
解説：
Explanation
The way that you can enable the preview features in your environment is to ask your FAW Service Administrator to enable the preview features in your existing FAW instance. The FAW Service Administrator can use the Enable Features option on the Console page to turn on or off individual preview features at any time5. You do not need to open a Support Request (SR) with Oracle support or provision a new FAW instance for this purpose
質問 # 40
In Fusion HCM Analytics, which job-specific role/group provides access to all HCM data without security restrictions on the HCM data set?
- A. Human Resource Manager
- B. Human Resource Analyst
- C. Human Resource Specialist
正解：B
質問 # 41
You want to edit global data pipeline parameters. How do you ensure that your changes are deployed and data is consistent?
- A. You must reset the data warehouse and activate the functional areas to ensure changes are effective during the next pipeline run.
- B. Changes to the global pipeline parameter take effect at the next incremental upload.
- C. Changes to the global pipeline parameter take effect immediately.
正解：B
解説：
Explanation
The way to ensure that your changes to the global pipeline parameters are deployed and data is consistent is to wait for the next incremental upload. Changes to the global pipeline parameters take effect at the next incremental upload, which is scheduled based on the frequency that you set in the parameters9. You do not need to reset the data warehouse or activate the functional areas for this purpose. Changes to the global pipeline parameters do not take effect immediately.
質問 # 42
You would like to back up your extensions and alt custom artifacts in FAW. What allows you to back up FAW artifacts?
- A. OAC built-in utilities
- B. FAW Bundles
- C. Snapshots
正解：C
解説：
Explanation
To back up your extensions and all custom artifacts in FAW, you can use snapshots. Snapshots are a feature in FAW that allows you to create a backup of your service instance, including the semantic model, data sets, reports, dashboards, and other analytics content2. You can also restore your service instance from a snapshot if needed3. OAC built-in utilities and FAW bundles are not available for backing up FAW artifacts
質問 # 43
You want to scale up your associated Oracle Autonomous Data Warehouse (ADW) and OAC as part of your FAW customization.
Who can help upscale the ADW and OAC capacities?
- A. Oracle Support
- B. FAW - Functional Administrator
- C. OCI Administrator with access to OCI pages for OAC and ADW instances
正解：C
解説：
Explanation
To scale up your associated Oracle Autonomous Data Warehouse (ADW) and OAC as part of your FAW customization, you need an OCI Administrator with access to OCI pages for OAC and ADW instances. The OCI Administrator can use the OCI Console or APIs to scale up or down the compute resources (CPU cores) or storage resources (terabytes) for both ADW and OAC instances
質問 # 44
......
1z0-1118-23ブレーン問題集PDF、Oracle 1z0-1118-23試験問題詰合せ：https://www.passtest.jp/Oracle/1z0-1118-23-shiken.html
2025年最新の1z0-1118-23サンプル問題は信頼され続ける1z0-1118-23テストエンジン：https://drive.google.com/open?id=10P0kicxgZS-VJQh4rUZLTne7DGVN_UqG