1z0-1118-23問題集で2025年最新のOracle 1z0-1118-23試験問題
無料で使える1z0-1118-23ブレーン問題集でダウンロード（1z0-1118-23テスト問題集無料更新された)
質問 # 21
You are required to join the Fusion Applications data extracted through FAW with external data. Which approach would meet your need?
- A. You must join the two sets of data in the ADW schema.
- B. FAW Semantic Model Extensions provide the ability to join the tables.
- C. External data and Fusion data cannot be joined.
正解：B
解説：
Explanation
You can use FAW Semantic Model Extensions to customize the semantic model and join the Fusion Applications data with external data. You can extend ready-to-use dimensions with additional attributes from another data source, add a fact to an existing subject area, and reorganize the ready-to-use subject areas to create a new subject area to name a few
質問 # 22
You want to scale up your associated Oracle Autonomous Data Warehouse (ADW) and OAC as part of your FAW customization.
Who can help upscale the ADW and OAC capacities?
- A. Oracle Support
- B. FAW - Functional Administrator
- C. OCI Administrator with access to OCI pages for OAC and ADW instances
正解：C
解説：
Explanation
To scale up your associated Oracle Autonomous Data Warehouse (ADW) and OAC as part of your FAW customization, you need an OCI Administrator with access to OCI pages for OAC and ADW instances. The OCI Administrator can use the OCI Console or APIs to scale up or down the compute resources (CPU cores) or storage resources (terabytes) for both ADW and OAC instances
質問 # 23
You have created your customization using Semantic Model Extensions. Now, you want to test your customization to ensure it meets your requirements.
What steps should you perform
- A. The customization appears automatically in your subject areas.
- B. Publish the branch that contains your customization.
- C. Publish all the branches.
正解：B
解説：
Explanation
To test your customization, you need to publish the branch that contains your customization. This will apply the changes to the model and make them available in the subject areas. You can then use OAC console to create and view reports based on your customized model3
質問 # 24
You have successfully implemented a security model in Fusion Applications that meets your securityrequirements.
However, you have noticed that FAW does not move and replicate your entire security implementation What can address your requirements in FAW?
- A. Set up SSO between FAW and Fusion Applications and synchronize user and Job roles.
- B. Open a support ticket and report the issues that you are encountering.
- C. Evaluate your security requirements and utilize security customization features in FAW to meet your needs.
正解：C
解説：
Explanation
The way that you can address your requirements in FAW when FAW does not move and replicate your entire security implementation from Fusion Applications is to evaluate your security requirements and utilize security customization features in FAW to meet your needs. FAW provides various security customization features, such as custom data roles, custom duty roles, custom security configurations, and functional groups, that allow you to define advanced data security and object security4. You do not need to set up SSO between FAW and Fusion Applications or open a support ticket for this purpose.
質問 # 25
How many instances of Oracle Fusion Analytics Warehouse (FAW) can you create based on a standard subscription?
- A. Number of instances Is based on the number of Fusion Application instances.
- B. Two instances: one for development/testing, and a second for production use.
- C. One instance for production use.
正解：B
解説：
Explanation
Based on a standard subscription, you can create two instances of Oracle Fusion Analytics Warehouse: one for development/testing, and a second for production use. You can use the development/testing instance to test new features or customizations before deploying them to the production instance3
質問 # 26
During the creation of the FAW instance, you have to provide the Fusion Applicationconnection details andauthentication information.
Which method of authentication is recommended by Oracle?
- A. Multi-factor authentication
- B. Password-based
- C. JSON Web Token
正解：C
解説：
Explanation
JSON Web Token (JWT) is the recommended method of authentication by Oracle for creating the FAW instance. JWT is a secure and self-contained way of transmitting information between parties as a JSON object. It is used to assert some number of claims
質問 # 27
When choosing a Cloud Account for activating Fusion Analytics Warehouse (FAW), which recommendation does Oracle provide?
- A. No recommendation is provided by Oracle on your choice of Cloud Account for the activation of FAW.
- B. Activate your FAW subscription in a separate Oracle Cloud account. The Oracle Cloud account for your Oracle Fusion Cloud Applications should be exclusively for use by the cloud applications.
- C. Activate FAW subscription into the same Oracle Cloud account as your Oracle Fusion Cloud Applications.
正解：C
解説：
Explanation
The highly recommended best practice is to activate your new UCC subscription into your Oracle Fusion Cloud Applications account followed by activating your Oracle Fusion Analytics Warehouse subscription into the same Oracle Cloud account as your Oracle Fusion Cloud Applications12
質問 # 28
You want to edit global data pipeline parameters. How do you ensure that your changes are deployed and data is consistent?
- A. Changes to the global pipeline parameter take effect immediately.
- B. Changes to the global pipeline parameter take effect at the next incremental upload.
- C. You must reset the data warehouse and activate the functional areas to ensure changes are effective during the next pipeline run.
正解：B
解説：
Explanation
The way to ensure that your changes to the global pipeline parameters are deployed and data is consistent is to wait for the next incremental upload. Changes to the global pipeline parameters take effect at the next incremental upload, which is scheduled based on the frequency that you set in the parameters9. You do not need to reset the data warehouse or activate the functional areas for this purpose. Changes to the global pipeline parameters do not take effect immediately.
質問 # 29
How many branches can you create to modify the semantic model?
- A. Depends on the number of users in your instance with the proper privileges.
- B. Supports more than one branch.
- C. Supports only one branch at a time.
正解：B
解説：
Explanation
You can create multiple branches to customize the semantic model. You use a branch or version to publish your changes to the model. You can apply the model from the branch to a local service instance for testing. When the changes are correct, you can merge that branch with the main branch3
質問 # 30
You would like to avoid creating Fusion Applications users and their assigned job roles in FAW.
What options are available in FAW for synchronizing users and job roles between FAW and Fusion Applications?
- A. Use the Bulk Load option in FAW to do the synchronization.
- B. Implement SSO and synchronization of users and job roles between FAW and Fusion Applications, before provisioning the FAW instance.
- C. Use the FAW console security option to create and manage users and job roles.
正解：B
解説：
Explanation
The option that is available in FAW for synchronizing users and job roles between FAW and Fusion Applications is to implement SSO and synchronization of users and job roles between FAW and Fusion Applications, before provisioning the FAW instance. This will allow you to avoid creating Fusion Applications users and their assigned job roles in FAW, as they will be automatically synchronized from Fusion Applications4. You cannot use the FAW console security option or the Bulk Load option in FAW to do the synchronization.
質問 # 31
LBAC is enabled in your Fusion pod. You plan to provision your instance using password-based authentication to Fusion Application.
What configuration does your Fusion Application require to achieve this?
- A. Custom roles need to be created for the user identified to authenticate access to the Fusion Application.These roles must to be enabled for access from All IP addresses.
- B. Log an SR for your Fusion Application and mention the identified user to authenticate to Fusion Application. Oracle Support will disable LBAC for the identified user.
- C. You need to identify the user who will be connected to the Fusion Application for pipeline orchestration. This user must be enabled for access from All IP Addresses.
正解：C
解説：
Explanation
LBAC (Location-Based Access Control) is a feature that restricts access to Fusion Applications based on IP addresses or ranges of IP addresses. If LBAC is enabled on your Fusion pod, you need to identify a user who will be used by FAW to connect to Fusion Applications using password-based authentication. This user must have access from All IP Addresses in order to allow FAW to extract data from any location.
Verified References: Securing Oracle Fusion Applications REST APIs with Location Based Access Control (LBAC), section "LBAC Configuration".
質問 # 32
You have reviewed out-of-the-box data security through the configuration of context assignment.You need to create custom data security to meet your data security requirements.
Which FAW settings provide this functionality?
- A. The Security Configurations available in the Semantic Model Extensions through the FAW Console provide this functionality
- B. A combination of steps in Security Console and the Security Configurations in the Semantic Model Extensions available at the FAW Console provides this functionality.
- C. You need to modify the Data Security Assignment file with the values you want for the users.
正解：B
解説：
Explanation
To create custom data security to meet your data security requirements, you need a combination of steps in Security Console and the Security Configurations in the Semantic Model Extensions available at the FAW Console. The Security Console allows you to create custom data roles and assign them to users or groups5. The Security Configurations allow you to define custom security filters and apply them to dimensions, facts, or subject areas6. You do not need to use only the Security Configurations or modify the Data Security Assignment file for this purpose.
質問 # 33
You are aware that a new FAW version just became available.
What is the best practice for upgrading a FAW instance to the latest version?
- A. Wait until Oracle upgrades the instance.
- B. Schedule the upgrade through the FAW console.
- C. Open an SR with Oracle.
正解：A
解説：
Explanation
The best practice for upgrading a FAW instance to the latest version is to schedule the upgrade through the FAW console. You can use the Upgrade option on the Console page to select the available version and schedule a date and time for the upgrade. You can also view the status and history of your upgrades on the same page1. You do not need to open an SR with Oracle or wait until Oracle upgrades the instance for this purpose.
質問 # 34
You have a table in your custom schema in ADW and would like to create a dimension using Semantic Model Extensions.
Which Fact tables can you join your custom dimension to?
- A. Only degenerate dimensions are supported.
- B. You can only join a custom dimension with a custom Fact table.
- C. You can join your custom dimension with custom Fact and out-of-the-box Fact tables.
正解：C
解説：
Explanation
You can create a dimension using Semantic Model Extensions and join it with any Fact table, whether it is a custom Fact table or an out-of-the-box Fact table. You can also join multiple dimensions with a single Fact table3
質問 # 35
You have terminated a FAW instance from the Oracle Cloud Infrastructure (OCI) console. You new want to reinstate that instance.
Can you recover a terminated instance?
- A. You can recover a terminated instance; just open a Service Request (SR) with Oracle support.
- B. You cannot recover a terminated instance; you will have to re-create your instance and restore it.
- C. You can recover a terminated instance with the click of a button from the OCl console.
正解：B
解説：
Explanation
You cannot recover a terminated instance of FAW from the OCI console. When you terminate an instance, all the resources associated with it are permanently deleted, including the OAC instance, the ADW instance, and the data warehouse. You will have to re-create your instance and restore it from a snapshot if you have one7. You cannot recover a terminated instance by opening a Service Request (SR) with Oracle support or by clicking a button from the OCI console.
質問 # 36
In the FAW Security framework, which mapping paradigm best describes the mapping ofSecurity Content to Data Roles?
- A. Security Context to Data Role is many-to-many
- B. Security Context to Data Role is one-to-many
- C. Security Context to Data Role is one-to-one
正解：A
解説：
Explanation
The FAW Security framework allows a flexible and extensible mapping of Security Content to Data Roles. A Security Content is a predefined attribute that defines the boundaries of data access for a given subject area, such as Business Unit, Country, Department, Job Family, Legal Entity, and Worker Type. A Data Role is a custom role that grants access to specific subsets of data in the data warehouse based on the Security Content.
A Security Content can be mapped to multiple Data Roles, and a Data Role can have multiple Security Content associated with it. For example, a Security Content of Country = US can be mapped to a Data Role of US HR Manager, and a Data Role of US HR Manager can have multiple Security Content such as Country = US, Business Unit = Sales, and Department = Marketing.
Verified References: Reference for Fusion HCM Analytics, page 9-10.
質問 # 37
You are in the process of implementing complex data security.
How would you secure your Fact table using data filters from different dimensions?
- A. Use functional groups to combine the data filters using the OR and AND operators.
- B. Create multi-table data sets in OAC and create a custom report.
- C. Currently, this scenario is not supported.
正解：A
解説：
Explanation
The way that you would secure your Fact table using data filters from different dimensions is to use functional groups to combine the data filters using the OR and AND operators. Functional groups are logical groups of dimensions that can be used to apply data filters on a Fact table. You can use functional groups to specify complex filter criteria that involve multiple dimensions and operators3. You do not need to create multi-table data sets in OAC or accept that this scenario is not supported.
質問 # 38
......
検証済みの1z0-1118-23問題集と解答で合格保証で試験問題集テストエンジン：https://www.passtest.jp/Oracle/1z0-1118-23-shiken.html
1z0-1118-23問題集は合格保証付き！合格させる1z0-1118-23試験：https://drive.google.com/open?id=1t7LHHNra4Jl-afsfbI88mx0OSDGQkUTT