[2025年07月]更新のC-TS414-2023試験問題集合格させるのは2025年最新のSAP Certified Associate - SAP S/4HANA Cloud Private Edition, Quality Management
無料で使えるC-TS414-2023試験問題集で合格させるお手軽に試験合格
質問 # 39
Which process step can automatically create a quality notification?
- A. Characteristics result recording
- B. Making a UD
- C. Creation of an inspection Lot
- D. Creation of quality info record
正解：A
質問 # 40
When the usage decision is made for a stock-relevant inspection lot, a goods movement should take place automatically. Where do you make the required setting?
- A. In the inspection type
- B. In the codes in the selected set
- C. In the movement type
- D. In the codes in the code group
正解：A
解説：
Automatic goods movement during usage decision (UD, transaction QA11) for stock-relevant lots (e.g., type
01) is configured in:
* In the Inspection Type (D): In Customizing (SPRO > QM > Quality Inspection > Inspection Lot Creation > Maintain Inspection Types), the inspection type (e.g., 01) has a "Automatic UD" and "Stock Posting" setting. Activating this links UD codes to movement types (e.g., 321 for quality to unrestricted), enabling automatic stock updates.
* Codes in the Selected Set (A): Selected sets (transaction QS51) define UD codes but don't control movements.
* Codes in the Code Group (B): Code groups (transaction QS41) are for catalog organization, not stock movement settings.
* Movement Type (C): Movement types (e.g., 321) are used but assigned via inspection type settings, not directly configured there.
Thus, "In the inspection type" is the correct answer.References: SAP Help Portal - "Automatic Stock Posting in QM"; SAP S/4HANA QM Customizing Guide - "Inspection Types".
質問 # 41
You have created a new business inspection process and need to customize a new inspection type. Which of the following activities are mandatory? Note: There are 2 correct answers to this question.
- A. Assign the new inspection type to a predefined inspection lot origin
- B. Assign the new inspection type to a number range
- C. Define default values for the new inspection type
- D. Assign a task list type to the new inspection type
正解：A、D
解説：
Creating a new inspection type in SAP QM (SPRO > QM > Quality Inspection > Inspection Lot Creation > Maintain Inspection Types) requires:
* Assign a Task List Type to the New Inspection Type (A): The inspection type (e.g., custom Z01) must be linked to a task list type (e.g., Q for inspection plans) to define the inspection scope, a mandatory step.
* Assign the New Inspection Type to a Predefined Inspection Lot Origin (C): The type must be assigned to an inspection lot origin (e.g., 01 for GR) to determine when lots are created, a required configuration.
* Assign the New Inspection Type to a Number Range (B): Number ranges are assigned to origins, not directly to types, so this is optional.
* Define Default Values for the New Inspection Type (D): Defaults (e.g., UD settings) are optional enhancements, not mandatory.
Thus, "Assign a task list type to the new inspection type" and "Assign the new inspection type to a predefined inspection lot origin" are the correct answers.References: SAP Help Portal - "Customizing Inspection Types"; SAP S/4HANA QM Customizing Guide - "Inspection Lot Creation".
質問 # 42
Which QM basic data can be used in the material specification? Note: There are 3 correct answers to this question.
- A. Master inspection characteristics
- B. Dynamic modification rule
- C. Inspection methods
- D. Selected set
- E. Sampling procedures
正解：A、C、E
解説：
Material specifications in SAP QM (transaction QS61) define inspection requirements directly in the material master, independent of task lists. They integrate specific QM basic data:
* Master Inspection Characteristics (A): MICs are the core of material specifications, defining what is inspected (e.g., length, pH). They are assigned to the material spec to set tolerances or qualitative codes.
* Sampling Procedures (C): These determine the sample size for the material spec's characteristics (e.g., fixed sample of 5). They are assigned to MICs within the material specification.
* Inspection Methods (E): Inspection methods (e.g., "Visual check") can be linked to MICs in the material spec to specify how the inspection is performed.
* Dynamic Modification Rule (B): This governs inspection scope changes (e.g., skip lots) and is assigned to inspection types or plans, not material specs directly.
* Selected Set (D): Selected sets are used for qualitative valuations (e.g., UD codes) but are not directly assigned to material specs; they link via MICs instead.
Thus, "Master inspection characteristics," "Sampling procedures," and "Inspection methods" are the correct answers.References: SAP Help Portal - "Material Specifications in QM"; SAP S/4HANA QM User Guide -
"Basic Data".
質問 # 43
Partners are involved in your notification processing. The partner determination procedure contains the partners who are involved in notification processing. Which assignment for a partner determination procedure is possible?
- A. Assignment to the material type
- B. Assignment to the material master
- C. Assignment to the notification origin
- D. Assignment to the notification type
正解：D
解説：
Partner determination in QM notifications (e.g., transaction QM01) assigns partners (e.g., responsible person) via:
* Assignment to the Notification Type (D): The partner determination procedure is assigned in Customizing (SPRO > QM > Quality Notifications > Notification Creation > Define Notification Types), linking specific partner roles (e.g., coordinator) to a notification type (e.g., Q1 for customer complaints). This is the standard approach.
* Notification Origin (A): Origins (e.g., 01 for GR) don't directly assign partner procedures.
* Material Type (B): Material types are MM settings, not linked to QM partner determination.
* Material Master (C): Material master doesn't store partner procedures for notifications.
Thus, "Assignment to the notification type" is the correct answer.References: SAP Help Portal - "Partner Determination in QM Notifications"; SAP S/4HANA QM Customizing Guide - "Notification Types".
質問 # 44
Your customer uses MIC and requests automatic defect recording
After configuration defect recording the implementation Guide ,which additional steps must you perform to satisfy customer requirements?
(2 correct ans)
- A. ssign an inspection method to your MIC
- B. Assign a notification type to an inspection type
- C. Select the radio button to activate quality notification in the defect class
- D. Activate defects recording in the characteristic control indicator for your MIC
正解：B、D
質問 # 45
You post a goods receipt for a purchase order item. A quality certificate is mandatory for the material, but no goods receipt inspection lots should be created. What will happen if the required certificate is not provided?
- A. The goods receipt is posted to blocked stock
- B. The goods receipt is posted to unrestricted use stock
- C. A quality notification is created automatically
- D. The missing certificate is escalated
正解：A
解説：
When a quality certificate is mandatory (set in the quality info record, transaction QI01) but no GR inspection lot is created (inspection type 01 inactive in the material master), the system handles the missing certificate as follows:
* The Goods Receipt is Posted to Blocked Stock (B): If the certificate is required (e.g., "Certificate Check" active in QI01) and not received (transaction QC55), the GR (transaction MIGO) posts the material to blocked stock (movement type 103/105 process). This is standard behavior to prevent unrestricted use until the certificate is confirmed, even without an inspection lot (SPRO > QM > Quality Certificates > Procurement > DefineControl Keys).
* Unrestricted Use Stock (A): This would occur only if no certificate check was enforced, contradicting the premise.
* Quality Notification Created Automatically (C): Notifications require manual creation or specific Customizing (e.g., defect recording), not automatic generation here.
* Missing Certificate Escalated (D): Escalation is not a standard SAP term or process in this context; it implies custom workflow not present in standard QM.
Thus, "The goods receipt is posted to blocked stock" is the correct answer.References: SAP Help Portal -
"Certificate Processing at Goods Receipt"; SAP S/4HANA QM User Guide - "Stock Posting".
質問 # 46
Where do you define the procedure for calculation of the quality score at usage decision?
- A. Inspection type settings in the material master
- B. Procurement data in the quality management view of the material master
- C. Quality info record: Procurement
- D. Usage decision code
正解：A
質問 # 47
By integrating the QM component in the production process, you can monitor and document process capability and the quality of products.
Which statistical and graphical tools does SAP provide to monitor a process ?
- A. Quality management inspection data interface QM-ID
- B. Quality management information system
- C. Statistical process controls (SPC)
- D. Statistical report charts
正解：C
質問 # 48
The receipt of a quality certificate should be recorded independently from the goods receipt. What is the necessary setting to fulfill this requirement?
- A. Assignment of a status profile in the certificate profiles
- B. Assignment of a status profile in the certificate type
- C. Indicator for enhanced certificate processing in the certificate type
- D. Control of certificate receipt in the quality info record: Procurement
正解：D
解説：
To record quality certificate receipt independently from goods receipt (GR) in SAP S/4HANA QM, the system must decouple these processes:
* Control of Certificate Receipt in the Quality Info Record: Procurement (B): In the quality info record (transaction QI01), the "Certificate Control" settings (e.g., "Certificate Required" and "Check at GR" unchecked) allow certificate receipt to be recorded separately (e.g., via transaction QC55) before or after GR. This is the standard setting to achieve independence, ensuring the GR posts to blocked stock or proceeds without certificate enforcement at that step (SPRO > QM > Quality Certificates > Procurement).
* Assignment of a Status Profile in the Certificate Profiles (A): Certificate profiles (transaction QC01) define outgoing certificates, not incoming certificate receipt processes.
* Indicator for Enhanced Certificate Processing in the Certificate Type (C): The certificate type (SPRO > QM > Quality Certificates > Define Certificate Types) has an "Enhanced Processing" indicator, but it relates to certificate creation, not independent receipt recording.
* Assignment of a Status Profile in the Certificate Type (D): Status profiles in certificate types manage certificate statuses, not GR independence.
Thus, "Control of certificate receipt in the quality info record: Procurement" is the correct answer.References:
SAP Help Portal - "Certificate Receipt in Procurement"; SAP S/4HANA QM Customizing Guide - "Quality Certificates".
質問 # 49
You have determined a new business inspection process and need to customize a new inspection type Which of the following activities must you complete? Correct 2
- A. Assign inspection type to inspection lot origin
- B. Define goods movement type
- C. Define default values for inspection type
- D. Assign Task list type to material types
正解：A、C
質問 # 50
During which of the following steps in a business process does a dynamic modification rule change severely
- A. Creation of a batch
- B. The creation of a certification
- C. The creation of a notification
- D. The creation of a inspection Lot
正解：D
質問 # 51
During an in process inspection for production orders, such as inspection type 09, which inventory posting is possible?
- A. Unrestricted Stock
- B. Quality stock
- C. Blocked stock
- D. None
正解：D
質問 # 52
Working area settings are mandatory for inspection planning within the engineering workbench. Which of the following are possible focuses for a working area? Note: There are 2 correct answers to this question.
- A. Classification
- B. Inspection characteristic
- C. Operation
- D. Header
正解：C、D
解説：
The Engineering Workbench (EWB) in SAP S/4HANA is a powerful tool for managing task lists, including inspection plans, in a structured and efficient way. Working areas in the EWB define the focus or scope of what users can edit or view during inspection planning. These settings are mandatory to streamline workflows and ensure the correct level of detail is maintained:
* Header (A): The header level refers to the overall inspection plan (e.g., plan group and group counter).
A working area focused on the header allows users to manage high-level attributes like validity dates or usage. This is a standard focus in EWB (transaction CEWB).
* Operation (B): Operations within an inspection plan define the steps or activities (e.g., "Measure dimension"). A working area focused on operations allows detailed planning at this level, including assigning control keys or work centers. This is another standard focus in EWB.
* Inspection Characteristic (C): While inspection characteristics (e.g., specific measurements) are part of an operation, they are not a standalone focus for a working area inEWB. They are managed within the operation context, not as a separate working area.
* Classification (D): Classification is used for categorizing objects (e.g., materials) but is not a focus for working areas in inspection planning within EWB. It's unrelated to this context.
Thus, "Header" and "Operation" are the correct focuses, aligning with EWB's structure for inspection planning.References: SAP Help Portal - "Engineering Workbench in QM"; SAP S/4HANA QM User Guide -
"Inspection Planning with EWB".
質問 # 53
To which of the following quality management basic data can you assign documents from the document management system (DMS)? Note: There are 2 correct answers to this question.
- A. Codes from code groups
- B. Master inspection characteristics
- C. Inspection methods
- D. Sampling procedures
正解：B、C
質問 # 54
Which partner function is mandatory when creating a quality notification for the Customer Complaint notification origin?
- A. Contact person
- B. Sold-to party
- C. Interested party
- D. Author
正解：B
解説：
For a quality notification with origin "Customer Complaint" (e.g., type Q1, transaction QM01):
* Sold-to Party (B): The sold-to party (customer) is mandatory because it identifies who raised the complaint, a key field in the notification header linked to SD data (SPRO > QM > Quality Notifications
> Notification Creation > Define Notification Types). Without this, the notification cannot be saved.
* Interested Party (A): Optional, used for additional stakeholders.
* Contact Person (C): Optional, specifies a customer contact but isn't required.
* Author (D): The creator (system user) is auto-filled, not a mandatory partner function.
Thus, "Sold-to party" is the correct answer.References: SAP Help Portal - "Customer Complaint Notifications"; SAP S/4HANA QM User Guide - "Partner Functions".
質問 # 55
You create a supplier claim notification with reference to material document year, number and item from a goods receipt for the PO What information is copied to the notification?
Note : 3 correct answer
- A. Inspection lot number
- B. Material number
- C. Purchasing document number and item
- D. Quantity and unit
- E. Advanced Shipping number
正解：B、C、D
質問 # 56
......
SAP C-TS414-2023 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
C-TS414-2023試験問題集、C-TS414-2023練習テスト問題：https://www.passtest.jp/SAP/C-TS414-2023-shiken.html
無料C-TS414-2023学習ガイド試験問題と解答：https://drive.google.com/open?id=1FiT2yVZo8wSTN6ow4fwdrOVFOo6j7ozC