5V0-35.21のPDF問題集で2023年07月31日最近更新された問題
5V0-35.21試験問題有効な5V0-35.21問題集PDF
質問 # 44
Which actions can be performed on vSphere virtual machine from vRealize Operations Product UI? (Choose three.)
- A. Add virtual disk
- B. Delete virtual machine snapshot
- C. Expand virtual disk
- D. Move virtual machine
- E. Create virtual machine snapshot
- F. Add vCPU
正解：B、C、E
質問 # 45
A customer is running a 4-node cluster for their Windows and Linux workloads. To keep the licensing costs at a minimum, the customer only licensed two nodes for Windows and two nodes for Linux within the cluster.
Now, the administrator needs to ensure the workloads only run on their assigned nodes.
What should an administrator configure to achieve this goal?
- A. Operational Intent - Hosts
- B. Business Intent - Clusters
- C. Operational Intent - Clusters
- D. Business Intent - Hosts
正解：A
質問 # 46
An administrator needs to manage a vRealize Operations cluster using the Admin UI.
Which two actions are possible? (Choose two.)
- A. Configuring a DNS server on the vRealize Operations nodes
- B. Enabling or disabling high availability for the vRealize Operations cluster
- C. Deploying a new vRealize Operations node OVA
- D. Activating a vRealize Operations native management pack
- E. Uploading and installing vRealize Operations PAK files
正解：B、C
質問 # 47
Which type of node in a vRealize Operations (vROps) design allows an administrator to scale out vROps to monitor very large environments?
- A. Primary nodes
- B. Data nodes
- C. Remote collectors
- D. Replica Primary nodes
正解：C
質問 # 48
An administrator discovered a problem in the virtual infrastructure and obtained instructions that would resolve the triggered alert.
Which alert component was used by the administrator?
- A. Recommendation
- B. Symptom
- C. Threshold
- D. Reclamation
正解：A
質問 # 49
An administrator has Telegraf agent installed on a server instance.
Which type of Remote Check may be configured?
- A. ICMP Check
- B. UDMP Check
- C. WMI Check
- D. RDP Check
正解：C
質問 # 50
An administrator is using vRealize Operations to optimize capacity within a vSphere Datacenter. The administrator will use the main categories for reclamation that are shown under the Reclaim view on the Home Screen navigation.
Which three main categories are available to the administrator in this view? (Choose three.)
- A. Powered Off VMs
- B. Unused Hosts
- C. Orphaned Disks
- D. VM Disks utilized %10 or less
- E. Snapshots
- F. Unused Datastores
正解：C、D、F
質問 # 51
Which two statements accurately characterize reports in vRealize Operations? (Choose two.)
- A. A report layout can contain table of contents, cover page, and footer.
- B. Scheduling of reports can be done hourly, daily, weekly, and monthly.
- C. Views and Dashboards are the only data types available for a report.
- D. Only PDF type reports can be used to schedule a report generation.
- E. Reports scheduled for generation can only be shared out via email.
正解：A、B
質問 # 52
An administrator has enabled the allocation model in a policy and set the CPU overcommit ratio to 4:1 for all vSphere clusters in a vSphere datacenter.
Why would vRealize Operations report that the cluster has 0 days remaining when the actual CPU overcommit ratio is less than the 4:1 configured value?
- A. The CPU demand in the cluster is greater than the total CPU capacity.
- B. The CPU demand in the cluster is less than the total CPU capacity.
- C. The allocation model does not account for powered off virtual machines.
- D. The allocation model will always report zero remaining capacity when the actual ratio is less than the configured ratio.
正解：A
質問 # 53
Which three steps are required to enable east/west firewall in VMware Cloud Director Tenant Portal? (Choose three.)
- A. Go to Networking and enable Distributed Firewall for one of the Network inside the Network section
- B. Click on Data Center Group and create a new Data Center Group
- C. Enable the firewall in NSX-T
- D. Go to Edge Gateways and enable firewall on one of the Edge Gateways
- E. Activate Distributed Firewall inside the Data Center Group
- F. Login to Customer Organization and go to Networking Section of Tenant Portal
正解：A、B、E
質問 # 54
Which two pricing card types are available in vRealize Operations? (Choose two.)
- A. Static-based
- B. Demand-based
- C. Rate-based
- D. Allocation-based
- E. Cost-based
正解：D、E
質問 # 55
Which two are supported Cloud Account types in vRealize Operations? (Choose two.)
- A. vRealize Automation
- B. Horizon Connection Server
- C. Microsoft Azure
- D. Google Cloud Platform
- E. vCenter Server
正解：A、D
質問 # 56
An administrator is unable to move a storage resource when using Workload Management.
What is the underlying reason for this problem?
- A. Storage DRS is configured only for cross-datacenter migrations.
- B. Storage DRS is not enabled for this cluster.
- C. DRS is not set to fully automated.
- D. DRS is not enabled for this cluster.
正解：B
質問 # 57
An administrator has been tasked with configuring vRealize Operations to ensure that workload performance across the VMware SDDC is the main priority. In the event of an issue, remediation activities should be automatically completed to minimize any impact to running workloads. A maximum of 10% cluster resources should be reserved for burst capacity.
Which option should the administrator configure to meet these requirements?
- A. Rightsizing
- B. Business Intent
- C. Operational Intent
- D. Reclamation
正解：B
質問 # 58
An active policy has been enabled with this alert definition:
"Virtual machine CPU usage is at 100% for an extended period of time."
This is causing alerts to be triggered frequently by test/development VMs, so the administrator would like to exclude alerts triggered by the test/development VMs, but not other VMs.
Which action would help achieve this goal?
- A. Create a policy inherited from the current active policy, set the alert definition state to "Disabled", and then assign to test/development VMs.
- B. On the Environment tab, select all test/development VMs, and then unassign the active policy that is currently assigned to the test/development VM.
- C. Under Alerts, select Alerts Definitions, and then remove the Symptoms Definition.
- D. Under Alerts, select Alerts Definitions, and then set the alert definition to "Disabled" for test/development VMs.
正解：B
質問 # 59
At which frequency are new services discovered when using Service Discovery in vRealize Operations?
- A. Every 5 minutes
- B. Every hour
- C. Every 15 minutes
- D. Every 24 hours
正解：A
質問 # 60
An administrator is asked to onboard an on-premises vCenter instance into an existing vRealize Operations Cloud instance.
Which two steps are needed to accomplish this goal? (Choose two.)
- A. Add a vCenter cloud account.
- B. Add a vRealize Operations Cloud account.
- C. Deploy and configure a Primary node.
- D. Deploy and configure a Data node.
- E. Deploy and configure a cloud proxy.
正解：A、E
質問 # 61
An organization's owner has invited a new user to consume VMware Cloud Services.
How long is the invitation valid before it is revoked?
- A. 7 days
- B. 3 days
- C. 24 hours
- D. 1 hour
正解：A
質問 # 62
To meet a requirement for protection against data loss in the event of a physical rack failure, an administrator is deploying a vRealize Operation cluster in a Continuous Availability configuration.
Which three node types will be configured within this scenario? (Choose three.)
- A. Primary node
- B. Remote Collector node
- C. Secondary node
- D. Secondary Replica node
- E. Witness node
- F. Primary Replica node
正解：D、E、F
質問 # 63
An administrator deployed vRealize Operations and has been tasked with ensuring that the VMware SDDC remains compliant to the VMware vSphere Security Configuration Guide. The compliance benchmark is showing that the VMware SDDC is not completely compliant to the standards.
Which three symptoms could have triggered a compliance alert? (Choose three.)
- A. The Forged Transmit policy is set to allow on a Distributed Port Group.
- B. The Enable 3D Support setting for the Virtual Machine is set to FALSE.
- C. The Disable console copy operation for a Virtual Machine is set to FALSE.
- D. The SNMP service on a vSphere ESXi host is set to Disabled.
- E. The lockdown mode on a vSphere ESXi host is set to Disabled.
- F. Transparent Page Sharing is Disabled on a virtual machine.
正解：A、D、E
質問 # 64
Which step is required before a Super Metric's data collection may begin?
- A. Enable in Object Types
- B. Enable in Objects
- C. Enable in Policy
- D. Enable in Alerts
正解：A
質問 # 65
An administrator created a default policy for the company. Additionally, separate policies for the production environment and the test and development environment were created, based on the company policy.
Refer to the exhibit:
What will be the impact, if any, of disabling some virtual machine metrics in the Production policy?
- A. There will be no impact because metrics cannot be disabled in policies.
- B. All objects will be affected because disabling metrics in a policy will disable them globally.
- C. Objects assigned to the Production policy will be affected.
- D. Objects assigned to the Production and TestDev policies will be affected.
正解：C
質問 # 66
Which statement accurately describes the characteristics of an alert notification?
- A. Notifications are configured as part of an alert's symptom definition.
- B. A SMTP Management pack is required to enable email notifications.
- C. vRealize Operations can be connected to the external alert notification system by configuring an outbound alert plug-in.
- D. Notifications are configured out-of-the-box but need to be explicitly enabled for each object discovered by vRealize Operations.
正解：A
質問 # 67
......
VMware 5V0-35.21 認定試験は、VMware vRealize Operations を使用して仮想化環境を自動化および最適化する能力を検証したい IT プロフェッショナルを対象として設計されています。この試験は、インストール、設定、管理、トラブルシューティングに関連する vRealize Operations に関するさまざまなトピックをカバーしています。この認定は、vRealize Operations の展開と構成、カスタムダッシュボードの作成、vRealize Operations を使用したパフォーマンスの監視と分析、および環境内の問題のトラブルシューティングに関する個人の知識を検証します。
5V0-35.21問題集合格確定させる練習には78問があります：https://www.passtest.jp/VMware/5V0-35.21-shiken.html
5V0-35.21練習テスト問題解答更新された78問があります：https://drive.google.com/open?id=1-uX92KwDElAxm4s12j9TyQbZ4_JA16Xc