C-TS411-2022試験問題集を試そう！ベストC-TS411-2022試験問題トレーニングを提供しています
実践サンプルと問題集指導には2023年最新のC-TS411-2022有効なテスト問題集
質問 # 27
The processing mode is set in the configuration profile and in the object dependencies. What needs to be taken into account?Note: There are 3 correct Answers to this question.
- A. The processing mode of object dependencies assigned to BOM and routing must always be "Classic" (independent of the configuration profile).
- B. The processing mode of object dependencies assigned to characteristics and characteristic values must be the same as that of the configuration profile.
- C. The processing mode of object dependencies assigned to BOM and routing must be the same as that of the configuration profile.
- D. The processing mode of dependencies assigned to characteristics and characteristic values must always be "Advanced Variant Configuration" (independent of the configuration profile).
- E. The processing mode of object dependencies assigned to the configuration profile must be the same as that of the configuration profile.
正解：B、C、E
質問 # 28
What is a class node?
- A. Special classes that are used as an operation in the routing.
- B. Special classes that are used as items in the BOM.
- C. Special classes that are used as nodes in class hierarchies.
- D. Special classes that enable a cross-class search.
正解：B
質問 # 29
You define a Product Master from scratch and a pop-up becomes visible. Which data do you have to enter?Note: There are 2 correct Answers to this question.
- A. Organizational Level
- B. Industry Sector
- C. Product Type
- D. Description
正解：C、D
質問 # 30
What should be taken into account for names of characteristics?Note: There are 3 correct Answers to this question.
- A. The name must start with a letter and must be assigned externally.
- B. If the name contains a hyphen, a keyword SKEY is required in the syntax of object dependencies.
- C. The following are allowed: Letters, figures, underscore, and hyphen.
- D. The name is purely numeric and must be assigned internally.
- E. You can change the name at any time later.
正解：A、B、C
質問 # 31
Where can you specify a processing sequence during an assignment?
- A. Pre- and Selection Conditions
- B. Procedures
- C. Constraints
- D. Constraint Nets
正解：B
質問 # 32
Which secure storage areas can be used inside a document info record?Note: There are 2 correct Answers to this question.
- A. FTP File Server
- B. HTTP Content Server
- C. RFC Archive
- D. SAP Database
正解：B、D
質問 # 33
Which item category is only available in configurable BOMs?
- A. Document item (D)
- B. Variable-size item (R)
- C. Non-stock item (N)
- D. Class item (K)
正解：D
質問 # 34
Which type of object dependencies must contain $self, $parent, or $root at least once?
- A. Pre- and Selection Conditions
- B. All types of object dependencies
- C. Constraints
- D. Procedures
正解：C
質問 # 35
What is a clear indicator of having local object dependencies?
- A. Status
- B. Syntax
- C. Administrative data
- D. Name
正解：A
質問 # 36
For which objects can you define a status network?Note: There are 2 correct Answers to this question.
- A. Change record
- B. Change number record
- C. Document info record
- D. Material master record
正解：A、C
質問 # 37
Why is a Work Center assigned to a Cost Center?
- A. For capacity to use shift sequences
- B. For costing to use activity types
- C. For assignment to find suitable people
- D. For scheduling to determine transportation time and queue time
正解：B
質問 # 38
Which features are available when working with the Manage Documents app?Note: There are 2 correct Answers to this question.
- A. All information is displayed on only one page.
- B. An object link to every SAP Object can be defined.
- C. A secure storage area is selected automatically.
- D. A secure storage area can be selected manually.
正解：A、C
質問 # 39
Which special feature must be taken into account for the material master of material variants for use in logistics?
- A. The material master requires a connection to the configurable material at client level.
- B. The material master at client level requires the indicator that it can be configured.
- C. The material master requires a link to the configurable material at sales area level.
- D. The material master requires a link to the configurable material at plant level.
正解：D
質問 # 40
You connected characteristics inside one class to organizational areas. What are the benefits?Note:
There are 2 correct Answers to this question.
- A. Users can only work with characteristics depending on the authorization for a particular organizational area.
- B. A check for the same classification is only possible inside one organizational area.
- C. Users can always see all characteristics for all areas.
- D. A check for the same classification is possible for all organizational areas.
正解：B、D
質問 # 41
What objects can be changed with a change number? Note: There are 2 correct Answers to this question.
- A. Bills of Material
- B. Task Lists
- C. Cost Centers
- D. Work Centers
正解：A、B
質問 # 42
What is the significance of the control key?Note: There are 3 correct Answers to this question.
- A. It is a value that can be copied to the routing as a reference.
- B. It is a mandatory field in the Work Center.
- C. It is an optional field in the Work Center.
- D. It is a value that can be used as a default value in the routing.
- E. It defines the usage of Work Centers in routings.
正解：A、B、D
質問 # 43
You use the app Find Objects in Classes. How do you find a class?Note: There are 2 correct Answers to this question.
- A. Via Class BOM
- B. Via assigned characteristics
- C. Via change number
- D. Via hierarchy
正解：B、D
質問 # 44
What happens to the group BOM when you do a plant assignment?
- A. The internal number and the BOM usage becomes new.
- B. The internal number stays unchanged and the BOM usage becomes new.
- C. The internal number and the BOM usage stays unchanged.
- D. The internal number becomes new and the BOM usage stays unchanged.
正解：D
質問 # 45
Why do you need a material BOM header status?
- A. It controls the usage of the material BOM items inside logistic chain.
- B. It controls the usage of the material BOM by a certain user.
- C. It controls the usage of an assembly indicator inside material BOM.
- D. It controls the usage of the material BOM inside logistic chain.
正解：D
質問 # 46
To which object of a Task List can you directly assign production resources/tools?
- A. Operations
- B. Headers
- C. Material assignments
- D. Sequences
正解：A
質問 # 47
There are item categories that are only allowed in configurable BOMs.What do you have to keep in mind when working with configurable routings?Note: There are 3 correct Answers to this question.
- A. Equipment as production resources/tools may only be used in configurable routings.
- B. All sequence categories can be used in non-configurable and configurable routings.
- C. All production resources/tools catgories can be used in non-configurable and configurable routings.
- D. All types of operation can be used in non-configurable and configurable routings.
- E. Alternative sequences may only be used in configurable routings.
正解：A、D、E
質問 # 48
......
最新100%合格率保証付きの素晴らしいC-TS411-2022試験問題PDF：https://www.passtest.jp/SAP/C-TS411-2022-shiken.html
C-TS411-2022有効な認定試験問題集解答学習ガイド：https://drive.google.com/open?id=1Micu-lT4JKrOjsm8QYMp_MIPENRsvPNi