SAP C-TS411-2022試験問題（更新されたのは2023年）100%リアル問題解答
合格させるSAP C-TS411-2022試験最速合格
質問 # 17
What is the meaning of the operation number in the routing?
- A. Similar to the BOM, it is only a sort sequence. The increment has no significance.
- B. It determines the sequence in which the operations are processed. The increment has no significance.
- C. It determines the sequence in which the operations are processed. The increment contains time buffers (float before and after production).
- D. It determines the sequence in which the operations are processed. The increment contains wait time and move time.
正解：C
質問 # 18
You can use the syntax element $set_pricing_factor for pricing in object dependencies.What do you need to consider?Note: There are 2 correct Answers to this question.
- A. $set_pricing_factor sets the variant condition and adds a factor to it. The variant condition must not already be assigned.
- B. $set_pricing_factor adds only one factor. The variant condition must already be assigned.
- C. Negative factors must not be used in $set_pricing_factor.
- D. You cannot use zero as a factor in $set_pricing_factor.
正解：A、D
質問 # 19
How can you set up a class hierarchy?Note: There are 2 correct Answers to this question.
- A. Using object links.
- B. Using class hierarchy maintenance.
- C. Assigning a class to a superior class.
- D. Using a class BOM.
正解：B、C
質問 # 20
What information does a change number header include?Note: There are 2 correct Answers to this question.
- A. Change type
- B. Object information
- C. Parameter effectivities
- D. Change number status
正解：B、D
質問 # 21
What should be taken into account for names of characteristics?Note: There are 3 correct Answers to this question.
- A. You can change the name at any time later.
- B. The name is purely numeric and must be assigned internally.
- C. The name must start with a letter and must be assigned externally.
- D. If the name contains a hyphen, a keyword SKEY is required in the syntax of object dependencies.
- E. The following are allowed: Letters, figures, underscore, and hyphen.
正解：C、D、E
質問 # 22
What do you have to keep in mind when overwriting characteristic for a specific class?
- A. The status of this characteristic is automatically set to locked.
- B. This change applies only to the characteristic, when it is used in every class.
- C. This change applies only to the characteristic, when it is used in this class.
- D. The status of this characteristic is automatically set to incomplete.
正解：C
質問 # 23
What do you have to keep in mind when creating a Product Master from scratch?Note: There are 2 correct Answers to this question.
- A. An industry sector can be selected.
- B. Only files can be connected and uploaded, no document info records.
- C. No view selection screen becomes visible.
- D. No organizational levels are asked.
正解：C、D
質問 # 24
Which item category is only available in configurable BOMs?
- A. Variable-size item (R)
- B. Non-stock item (N)
- C. Document item (D)
- D. Class item (K)
正解：D
質問 # 25
You use the app Find Objects in Classes. How do you find a class?Note: There are 2 correct Answers to this question.
- A. Via assigned characteristics
- B. Via hierarchy
- C. Via change number
- D. Via Class BOM
正解：A、B
質問 # 26
You create a new characteristic with numeric values and you only set a single value assignment. You add one interval inside value tab. What does it mean for classification?
- A. The user can select several values out of the interval inside classification.
- B. The user can select one value of the interval inside classification.
- C. The user can set values which don't belong to the interval.
- D. The user can select an interval inside classification.
正解：B
質問 # 27
What controls the material BOM item category?Note: There are 2 correct Answers to this question.
- A. A work center is required.
- B. A negative quantity is allowed.
- C. A material number is required.
- D. A change number is required.
正解：B、C
質問 # 28
Which scenarios are available with the Maintain Bill of Material app?Note: There are 2 correct Answers to this question.
- A. Attach a change order.
- B. Create a Version BOM.
- C. Define Software Constraints.
- D. Display Valid From and Valid To information.
正解：B、C
質問 # 29
In a single-level configuration, you want to use a constraint so that if characteristic C1 has the value V1, then characteristic C2 is assigned the value V2.C1 and C2 are assigned to class (300)T_FCL00.What would be a correct complete constraint?
- A. RESTRICTION: $self.C2 = 'V2' if $self.C1 = 'V1'
- B. RESTRICTION: ?C2 = 'V2' if ?C1 = 'V1'
- C. RESTRICTION: (300)T_FCL00.C2 = 'V2' if (300)T_FCL00.C1 = 'V1'
- D. RESTRICTION: ?T_FCL00.C2 = 'V2' if ?T_FCL00.C1 = 'V1'
正解：C
質問 # 30
What is the easiest way to check whether a model is consistent with regard to the processing mode of the configuration profile and object dependencies?
- A. You use the function Inconsistent VC Models in the app Variant Configuration Overview.
- B. You use the Extras function in the material configuration (Simul./ModelingCheck Model CU50).
- C. You use the Check Model function in the Simulate Configuration Models app.
- D. You use the Check Model function in the (VC modeling Environment PMEVC).
正解：D
質問 # 31
To which object of a Task List can you directly assign production resources/tools?
- A. Material assignments
- B. Sequences
- C. Operations
- D. Headers
正解：C
質問 # 32
You work with cross-plant and plant-specific Product Master statuses. Which status has the highest priority?
- A. The least restrictive status.
- B. The most restrictive status.
- C. The cross-plant status.
- D. The plant-plant specific status.
正解：C
質問 # 33
Which are the settings for material variant determination that are also made in customizing for the item categories for the sales document?Note: There are 3 correct Answers to this question.
- A. Setting routing determination (link or individual)
- B. Activate the variant matching
- C. Availability check/ATP material variant
- D. Setting BOM determination (link or individual)
- E. Set actions for material variants
正解：B、C、E
質問 # 34
Working with the document status, what should you keep in mind?Note: There are 2 correct Answers to this question.
- A. It can be defined as a status network.
- B. It can be set at object link level.
- C. It can only be defined plant specific.
- D. It can be defined depending on document type.
正解：A、D
質問 # 35
What do you have to keep in mind when copying a group BOM to a plant specific BOM?Note: There are
2 correct Answers to this question.
- A. The internal BOM number stays unchanged.
- B. The BOM usage can be changed.
- C. The material component must have a plant assignment.
- D. The header status has to be active.
正解：A、C
質問 # 36
Which scenarios are possible when you upload files to a Product Master?Note: There are 2 correct Answers to this question.
- A. You can easily upload a file, select a Workstation Application and a Content Server.
- B. You can easily attach a Document Info Record.
- C. You cannot attach a Document Info Record.
- D. You can easily upload a file without selecting a Workstation Application and a Content Server.
正解：B、D
質問 # 37
For which objects can you define a status network?Note: There are 2 correct Answers to this question.
- A. Document info record
- B. Change number record
- C. Material master record
- D. Change record
正解：A、D
質問 # 38
How can you restrict the search result?Note: There are 2 correct Answers to this question.
- A. Reselect
- B. Validity
- C. Change number
- D. Filters
正解：A、D
質問 # 39
What can you do when the class status is set to locked?Note: There are 2 correct Answers to this question.
- A. Maintain the class.
- B. Find objects in this class.
- C. Maintain a classification.
- D. Assign this class to a superior class.
正解：A、B
質問 # 40
......
リアルSAP C-TS411-2022試験問題 [更新されたのは2023年]：https://www.passtest.jp/SAP/C-TS411-2022-shiken.html
準備C-TS411-2022問題解答でC-TS411-2022試験問題集：https://drive.google.com/open?id=1Micu-lT4JKrOjsm8QYMp_MIPENRsvPNi