更新された検証済みのC-IBP-2211問題集と解答には100%一発合格保証問題集はここ [Q24-Q47]

更新された検証済みのC-IBP-2211問題集と解答には100%一発合格保証問題集はここ

合格SAP Certified Application Associate C-IBP-2211試験問題には80問があります

質問 # 24
Which of the following approaches could you take to reduce run times of an optimizer?Note: There are 3 correct answers to this question.

• A. Keep the number of fairshare segments small.
• B. Increase the use of incremental lot size beyond the frozen horizon.
• C. Split into multiple planning areas to support weekly vs. daily planning needs.
• D. Avoid using telescopic time buckets.
• E. Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.

正解：C、D、E

質問 # 25
What actions can be performed in the Advanced Dashboards application?Note: There are 3 correct answers to this question.

• A. Use drill-down functionality.
• B. Add process templates.
• C. Display all assigned analytics on a single UI.
• D. Rename the charts.
• E. Link two analytics charts.

正解：A、B、C

質問 # 26
You are evaluating criteria for choosing the solver to support planning for a complex supply chain. What are some of the points that should be reviewed?Note: There are 2 correct answers to this question.

• A. Prioritization of demand elements one by one is achieved by unconstrained heuristics.
• B. Planning results can be generated faster by the optimizer.
• C. Push and Pull production models are used by the optimizer.
• D. Finite heuristics can achieve demand prioritization and pegging.

正解：C、D

質問 # 27
Which pre-processing steps can be used to cleanse historical sales data before generating a statistical forecast in SAP IBP?Note: There are 2 correct answers to this question.

• A. Promotion Sales Lift Elimination
• B. Bias Detection and Correction in Sales History
• C. Intermittency Detection and Correction in Sales History
• D. Substitute Missing with Mean or Median in Sales History

正解：A、D

質問 # 28
Safety Stock outputs from Multistage Inventory Optimization are sent to which of these processes?
Note: There are 2 correct answers to this question.

• A. Demand Sensing with Gradient Boosting (Full)
• B. Charts creation in SAP Supply Chain Control Tower
• C. Supply Heuristics in SAP IBP for sales and operations
• D. Decoupling Points determination in SAP IBP for demand-driven replenishment

正解：A、C

質問 # 29
Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.

• A. Periods are identified by an alphanumeric prefix and profiles by an integer.
• B. Both periods and profiles have start and end dates.
• C. Periods are identified by an integer and profiles by an alphanumeric prefix.
• D. Both periods and profiles are identified by a unique integer.

正解：A、C

質問 # 30
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.How can you resolve this problem?Note: There are 2 correct answers to this question.

• A. Use the Manage Master Data app to create the combinations
• B. Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel
• C. Use the Check Mode operator to create the combinations
• D. Use the Data Integration app to load suitable data that creates the combinations

正解：A、D

質問 # 31
What are some of the prerequisites for configuring a planning area that results in a successful consistency check?Note: There are 2 correct answers to this question.

• A. Configure at most two input key figures on the same planning level in a key figure calculation.
• B. Specify a planning horizon in the planning area for each level of the assigned time profile.
• C. Configure at least one calculated key figure for the planning area.
• D. Assign the compound master data type and its component master data types.

正解：B、D

質問 # 32
What are some of the properties of filter blocks?Note: There are 3 correct answers to this question.

• A. Filter blocks are imposed when modeling attribute transformations.
• B. Filter blocks can be visualized in the Key Figure Calculations app.
• C. Filter blocks are imposed when modeling cross-period calculations.
• D. Filter blocks can be visualized in SAP IBP, add-in for Microsoft Excel
• E. Filter blocks are imposed when modeling an attribute as a key figure.

正解：A、D、E

質問 # 33
You define fixing for a key figure.Which of the following functions are available for this key figure? Note: There are 2 correct answers to this question.

• A. Fixing is possible for a certain quantity of a key figure value.
• B. Fixing is possible for a certain period, including all child values in the hierarchy.
• C. Fixing is possible for system editable key figures.
• D. Fixing is possible for manually editable key figures.

正解：B、C

質問 # 34
A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?

• A. IF("PERIODID3" ="$$PERIODID3CU$$...)
• B. IF("PERIODID4" ="$$PERIODID4CU$$...)
• C. IF("PERIODID2" ="$$PERIODID2CU$$...)
• D. IF("PERIODID5" ="$$PERIODID5CU$$...)

正解：B

質問 # 35
What do you need to be aware of when using multiple pairs of key figures in one copy operator? Note:
There are 2 correct answers to this question.

• A. Copying multiple key figures on different planning levels is not possible.
• B. Copying multiple key figures can be processed sequentially.
• C. If necessary source key figures values are disaggregated.
• D. If necessary target key figures values are disaggregated.

正解：B、D

質問 # 36
Which of these conditions must be met to create a Local Member key figure?Note: There are 2 correct answers to this question.

• A. Activate Local Member Recognition setting is selected.
• B. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel.
• C. Users should have authorization for template administration.
• D. Use Excel Cell References in the Report Editor option is selected.

正解：A、C

質問 # 37
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.

• A. Aggregated constraints
• B. Maximum lot size
• C. Adjusted transport receipts
• D. Minimum lot size
• E. Transportation lead times

正解：B、C、E

質問 # 38
What is a prerequisite for modeling outsourced manufacturers with production capacity using the Supply Optimizer?

• A. Ensure that the outsourced manufacturing locations have a separate subnetwork
• B. Use production lead times and offsets to manage components at the outsourced manufacturing location
• C. Model target inventory and stocks at the outsourced manufacturing location
• D. Model relative production costs across internal locations and outsourced manufacturing locations

正解：D

質問 # 39
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note: There are 2 correct answers to this question.

• A. The key figure is stored and system editable.
• B. The key figure is calculated and system editable.
• C. The key figure is calculated and all editable.
• D. The key figure is stored and all editable.

正解：D

質問 # 40
Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.

• A. Target Service Level
• B. Minimum Lot Size
• C. Holding Cost Percentage
• D. Transportation Lead Time Error CV

正解：A、B

質問 # 41
You have set up a planning area, and data is now available. You adjust the necessary time profile settings and run a consistency check.Which settings can you change and still run a successful consistency check?Note: There are 2 correct answers to this question.

• A. Add a new time profile level to the time profile.
• B. Change the past and future horizon of the levels in the time profile.
• C. Change the description of the attributes in the time profile.
• D. Change the numbering hierarchy of the period IDs in the time profile.

正解：B、C

質問 # 42
What are the outputs of the Calculate Target Inventory Components Operator?Note: There are 3 correct answers to this question.

• A. Target Cycle Stock
• B. Recommended Safety Stock
• C. Reorder Point
• D. Target Pipeline Stock
• E. Component Usage

正解：A、B、D

質問 # 43
Which of the following key functions are supported by SAP IBP for sales and operations?Note: There are
2 correct answers to this question.

• A. Multi-Level Supply Planning Heuristics
• B. Time series analysis
• C. Scenario analysis for operational supply planning
• D. Simple statistical forecast

正解：A、D

質問 # 44
You are reviewing the master data types that are often used for supply and inventory planning
.Which master data types are compound master data types?Note: There are 2 correct answers to this question.

• A. SOURCECUSTGROUP
• B. SOURCEPRODUCTION
• C. SOURCELOCATION
• D. SOURCECUSTOMER

正解：C、D

質問 # 45
Which are the mandatory preconditions for an attribute that can be used for saving the segmentation results?Note: There are 2 correct answers to this question.

• A. The attribute should be a non-key attribute of the master data type.
• B. The attribute belongs to a simple or compound master data type.
• C. The attribute should be assigned to all planning levels.
• D. The Business Meaning of the attribute has been specified.

正解：A、B

質問 # 46
What are some of the available ABC segmentation methods in SAP IBP?Note: There are 2 correct answers to this question.

• A. By Number of Items (Sorted Average)
• B. By Pareto Principle (Sorted and Calculated Values)
• C. By Number of Items (Sorted Values)
• D. By Pareto Principle (Sorted and Cumulated %)

正解：B、C

質問 # 47
......

究極の無料ガイド準備C-IBP-2211試験問題と解答：https://drive.google.com/open?id=1hQpf_dn0R2wbYbPsvC0ZgjXhgD_xGp66

合格させるC-IBP-2211テストエンジンPDFで完全版無料問題集がここに：https://www.passtest.jp/SAP/C-IBP-2211-shiken.html