[2023年11月09日] 合格させるNACE-CIP2-001レビューガイド、信頼され続けるNACE-CIP2-001テストエンジン
NACE-CIP2-001テストエンジン練習テスト問題、試験問題集
NACE-CIP2-001 資格認定は、コーティング産業でキャリアアップを目指す方にとって不可欠です。この認定は世界中の雇用主に認められており、コーティング検査における高度な能力を証明しています。この認定を持つコーティング検査員は高い需要があり、高い給与やキャリアアップの機会が期待できます。
NACE-CIP2-001 の認定試験は、コーティング検査員にとっては厳しい試験ですが、重要な認定試験です。この試験は、コーティング検査に関する広範なトピックについての候補者の知識とスキルをテストし、業界で広く認識されています。この試験に合格したコーティング検査員は、キャリアを進め、幅広いコーティング検査の仕事に適格になることができます。
質問 # 52
Non-Conformance Reports are designed to:
- A. Elevate the status of the Inspector
- B. Assist the Owner in negotiating credits from the Contractor
- C. Punish the Contractor for substandard work
- D. To identify items that do not meet the specification requirements
正解：D
質問 # 53
Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?
- A. Acid etching
- B. Stoning
- C. Sacking
- D. High-pressure water washing
正解：C
質問 # 54
You are the NACE Level 2 inspector reviewing the documentation from a NACE Level 1 you notice significant documentation errors.
Your FIRST preferred course of action is to:
- A. Correct the errors yourself and suggest the Level 1 inspector be replaced
- B. Correct the errors yourself and advise your supervisor that the Level 1 Inspector is incompetent
- C. Have the Level 1 Inspector correct the errors and set up remedial training to improve the quality of documentation
- D. Correct the errors yourself and submit the reports without any further action
正解：C
質問 # 55
You are a NACE Level 2 in-house inspector working in a shop. Your in-house requires you to perform a sleeve test to test for soluble salts; however the 3 rd party NACE Level 3 inspector, the owner, has a san smart meter and has achieved a very different result and has rejected the pre-cleaning.
Your FIRST course of action is to:
- A. Advise your QC Manager to change the ITP to the use of the salt smart meter
- B. Review the specification with the other inspector to see what method was specified
- C. Redo the pre-cleaning based on the other inspectors results
- D. Advise the other inspector he is using an incorrect method
正解：B
質問 # 56
In powder coatings, when the particles of powder begin to flow but are not fully liquid, they are in what stage?
- A. Cure stage
- B. Gel stage
- C. Flow stage
- D. Wetting stage
正解：C
質問 # 57
When measuring the Dry Film Thickness Of liquid coatings applied to galvanized ferrous substrates the most commonly used instrument is the:
- A. Ultra Sonic DFT Gauge
- B. Eddy Current Gauge
- C. Tooke Gauge
- D. Magnetic Gauge
正解：C
質問 # 58
You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor's supervisor. Upon arriving onsite the Contractor's supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.
Your FIRST preferred course of action is to:
- A. Suggest to the Owner that the supervisor should be removed from site
- B. Challenge the supervisor's authority
- C. Defend the previous inspector
- D. Express a willingness to work with the site team and follow the specification
正解：D
質問 # 59
Steel shot grit contaminated with oil or grease used in a cetrifugal blast cleaning should be
- A. mixed with uncontaminated abrasive
- B. disposed of properly.
- C. washed with clean potable water prior to Use.
- D. run through the air wash separator.
正解：B
質問 # 60
When environmental enclosures are being used an inspector needs to be concerned about:
- A. Structural integrity
- B. Air changes
- C. Lighting
- D. a), b), and c)
正解：D
質問 # 61
All of these are advantages of using repair patches EXCEPT
- A. barrier to moisture and corrosion.
- B. special tools or equipment are required.
- C. excellent abrasion resistance.
- D. inert to common acids, alkalis, and solvents.
正解：B
質問 # 62
Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires
- A. 25 single rubs with a saturated cloth.
- B. 35 single rubs with a saturated cloth.
- C. 25 double rubs with a saturated cloth.
- D. 50 double rubs with a saturated cloth.
正解：D
質問 # 63
Application of Thermal Spray Coatings requires:
- A. The same skills as liquid coatings
- B. The same skills as welding
- C. No particular skills
- D. Specialized skills supported by training and experience
正解：D
質問 # 64
You are the NACE Level 2 Inspector with the final responsibility to prepare the final report for a very large structural steel shop project which has gone very well. It is due next week. The work has been ongoing for two years and several NACE Level 1 Inspectors have worked under your supervision throughout the project. You find you are missing one week of daily reports for the night shift from the very beginning of the project and despite your best efforts they are cannot found.
You FIRST preferred course of action is to:
- A. Do not complete your report until they can be found
- B. Re-create the reports as not much was going on during night shift anyway
- C. Use creative writing to cover over the fact they are missing
- D. Plainly state in your report that they are missing
正解：D
質問 # 65
When performing a hardness test on a coating which has elastic properties the inspector is likely to likely to observe:
- A. A very high reading
- B. A very low reading
- C. No difference from any other coating
- D. Cold flow or creep
正解：D
質問 # 66
NACE Standards include:
- A. Material Requirements
- B. a) only
- C. Standard Practices
- D. a) & b)
正解：D
質問 # 67
You are the NACE Coating Inspector on a tank lining project and are asked to perform a high voltage holiday test after the coating applicators have completed their final repairs. After meeting all the confined space entry permit you enter the tank and notice a very strong odor of solvent.
Your first course of action should to:
- A. Investigate to find the source of the odor
- B. Exit the tank and immediately and report the problem to the nearest safety supervisor
- C. Exit the tank and document the incident in your daily report
- D. Don your air supplied respirator and continue the testing
正解：B
質問 # 68
Coating Surveys are legally required:
- A. On water tanks and potable water pipelines
- B. On commercial marine vessels and offshore platforms
- C. On high pressure gas lines and fireproofed structures
- D. On food and beverage vessels and can linings
正解：B
質問 # 69
You have just your NACE CIP Level 2 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:
- A. Advise the prospective employer that you cannot accept the position
- B. Accept assignment without hesitation
- C. Meet with the prospective employer to scope of your role
- D. Review the NACE Attestation prior to making a decision
正解：D
質問 # 70
......
100%無料NACE-CIP2-001日常練習試験には100問があります：https://www.passtest.jp/NACE/NACE-CIP2-001-shiken.html
NACE-CIP2-001試験資料NACE学習ガイド：https://drive.google.com/open?id=1QJu0ztR8Wi63JEsKl3_hYi_F6zOEkq5E