NACE-CIP2-001問題集合格保証付きの合格できるNACE-CIP2-001試験2024年更新
NACE-CIP2-001試験問題集を試そう！ベストNACE-CIP2-001試験問題トレーニングを提供していますPassTest
NACE-CIP2-001試験は、レベル2の認定塗装検査員になりたい個人を対象としています。腐食防止ソリューションのグローバルリーダーであるNACE Internationalがこの試験を管理しています。この認定資格は、業界で高く評価され、世界的に認知されています。この試験は、石油・ガス、海洋、建設などのさまざまな産業で、さまざまな塗装検査タスクを実行するために必要な知識とスキルを測定します。
この試験は、筆記試験と実技試験の2つの部分から構成されています。筆記試験は、試験シラバスに概要されたトピックをカバーする多肢選択問題から構成されています。一方、実技試験は、実際の現場において学んだ知識やスキルを適用できるかを評価するために設計されています。この試験では、塗装の厚さの測定や表面処理の評価、塗装欠陥の特定など、さまざまな塗装検査のタスクを実行する必要があります。
質問 # 18
In powder coatings, when the particles of powder begin to flow but are not fully liquid, they are in what stage?
- A. Cure stage
- B. Gel stage
- C. Wetting stage
- D. Flow stage
正解：D
質問 # 19
NACE/SSPC Water Jetting standards are directly equivalent to ISO Abrasive Blast Standards:
- A. True
- B. False
正解：B
質問 # 20
Pre-cleaning of work pieces will NOT remove
- A. oil or grease.
- B. mill scale.
- C. snow, ice or water.
- D. dirt.
正解：B
質問 # 21
Linings are used on the interior of pipelines to
- A. provide protection against soil chemicals.
- B. reduce magnetic polarity.
- C. protect the transported product.
- D. afford limited temperature insulation.
正解：C
質問 # 22
Coating surveys may include which steps?
Select All That Apply:
- A. Evaluate the coatings performance
- B. Schedule the remedial work
- C. Develop a survey plan
- D. Summarize the collected data
正解：A、B、C、D
質問 # 23
The Concrete Repair Institute's comparators can be used to assess:
- A. Compressive and tensile strength prior to coating
- B. Contamination levels prior to coating
- C. Surface cleanliness prior to coating
- D. Surface profile prior to coating
正解：D
質問 # 24
Inspection and Test Plans are provided to:
- A. To supersede the requirements of the product data sheets
- B. Outline the inspection steps, sequencing and pass/fail criteria
- C. So the contractor has a single document to reference
- D. So the Inspector doesn't have to read the entire specification
正解：B
質問 # 25
Inspectors perform tests on linings that they may not perform on exterior coatings because
- A. coatings are more durable than linings.
- B. linings are more durable than coatings.
- C. coatings are expected to degrade over time.
- D. linings protect the contents and the container.
正解：D
質問 # 26
Inspection and Test plans are developed by referencing:
- A. The Specification, Safety Manual, Relevant Standards and Codes
- B. The Specification, Application Guidelines, 'Relevant Standards and Codes
- C. The Specification, SDS, relevant Standards and Codes
- D. The Specification, TDS, relevant Standards and Codes
正解：D
質問 # 27
NACE Level 2 Inspectors have been authorized to perform:
- A. All types of inspection without supervision
- B. Visual inspection only
- C. Visual inspection and Non-destructive testing
- D. Visual inspection, Non-Destructive and Destructive testing
正解：D
質問 # 28
You are the new NACE Level 2 Inspector on a job which had been very problematic. The previous Inspector was fired duo to personality conflicts with the Contractor's supervisor. Upon arriving onsite the Contractor's supervisor advises you in no uncertain terms that you will be the next to go, unless you cooperate with him.
Your FIRST preferred course of action is to:
- A. Suggest to the Owner that the supervisor should be removed from site
- B. Challenge the supervisor's authority
- C. Defend the previous inspector
- D. Express a willingness to work with the site team and follow the specification
正解：D
質問 # 29
The primary purpose of Fireproofing coatings are to provide:
- A. Temporary protection for the structure
- B. Preferential fuel for the fire
- C. fire extinguishing characteristics
- D. Explosion resistance
正解：A
質問 # 30
Generally for safety considerations, waterjetting hose connections use
- A. a whip-lock device.
- B. filters.
- C. an oil/water separator.
- D. a long wand.
正解：A
質問 # 31
Centrifugal blast cleaning requires:
- A. Very large nozzles
- B. The use of single use abrasives
- C. Well maintained blast wheels
- D. A large volume of air to propel the abrasive
正解：C
質問 # 32
Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires
- A. 50 double rubs with a saturated cloth.
- B. 35 single rubs with a saturated cloth.
- C. 25 double rubs with a saturated cloth.
- D. 25 single rubs with a saturated cloth.
正解：A
質問 # 33
When performing an adhesion test in accordance with ASTM D 3359 where the Dry Film Thickness is approximately 10 mils, the Inspector should use:
- A. Method A - X Cut
- B. Method B - X cut
- C. Method A - Cross Hatch
- D. Method B - Cross Hatch
正解：A
質問 # 34
All of these are advantages of using repair patches EXCEPT
- A. inert to common acids, alkalis, and solvents.
- B. excellent abrasion resistance.
- C. special tools or equipment are required.
- D. barrier to moisture and corrosion.
正解：C
質問 # 35
Which product, when closely inspected has a green or red layer of fusion bonded epoxy (FBE) that is visible directly on the steel?
- A. Fusion Bonded Epoxy
- B. Coal Tar Enamel
- C. 3-Layer Polyethylene (PE)
- D. 2-Layer Polyethylene (PE)
正解：C
質問 # 36
Which product, is used in conjunction with other coatings such as FBE when the lines run through wetlands or a body of water?
- A. 2-Layet Polyethylene (PE)
- B. 3-Layet Polyethylene (PE)
- C. Concrete
- D. Coal Tar Enamel
正解：C
質問 # 37
It is always possible to see moisture on a steel substrate:
- A. True
- B. False
正解：B
質問 # 38
From a corrosion perspective, the main difference between Ferrous and Non-Ferrous Metals is:
- A. Cost
- B. Iron content
- C. Appearance
- D. Safety
正解：B
質問 # 39
......
最新100%合格率保証付きの素晴らしいNACE-CIP2-001試験問題PDF：https://www.passtest.jp/NACE/NACE-CIP2-001-shiken.html
実践サンプルと問題集指導には2024年最新のNACE-CIP2-001有効なテスト問題集：https://drive.google.com/open?id=19bQkE75lVm39lFuh75cpmfZlV0s4s1Kz