合格保証付きクイズ2024年最新の実際に出る検証済みのCQE無料試験問題集
無料ASQ Certification CQE究極な学習ガイド（更新されたのは175問があります)
質問 # 101
Which of the following types of planning uses a strategic planning process that relates idealistic goals to work strategy?
- A. Yoji planning
- B. Deining planning
- C. Hoshin planning
- D. Juran planning
正解：C
解説：
Hoshin planning, also known as Hoshin Kanri or policy deployment, is a strategic planning process that aligns an organization's functions and activities with its strategic objectives. It involves setting idealistic goals and linking them to actionable work strategies through a systematic approach. This method ensures that all levels of an organization are working harmoniously towards common objectives.
質問 # 102
In most cases, an improvement team facilitator will NOT normally:
- A. Summarize key ideas generated by the group.
- B. Provide feedback to the group.
- C. Function as the group leader.
- D. Be familiar with problem solving techniques.
正解：C
質問 # 103
Which of the following control charts are more efficient than an X-bar chart at detecting small shifts in the mean?
I. CUSUM.
II. EWQR.
III. EWMA.
- A. I and III only
- B. I only
- C. III only
- D. II only
正解：A
質問 # 104
Which of the following is NOT considered a prevention cost?
- A. Data acquisition and analysis.
- B. Training.
- C. Writing operating procedures.
- D. Calibrating test equipment.
正解：D
質問 # 105
A system was designed with 3 capacitors. When the system is first activated all capacitors are operating. The system continues to operate as long as at least 1 capacitor is operating. This is an example of
- A. Redundancy.
- B. A standby parallel system.
- C. A series system.
- D. An active parallel system.
正解：D
質問 # 106
An operation requires shipments from your vendor of small lots of fixed size. The attribute sampling plan used for receiving inspection should have its OC curve developed using
- A. The Poisson distribution.
- B. The hypergeometric distribution.
- C. The binomial distribution.
- D. The Gaussian (normal) distribution.
正解：B
質問 # 107
The design function which assigns probability of failures between components or subsystems is called
- A. Confidence.
- B. Qualification.
- C. Significance
- D. Apportionment.
正解：D
質問 # 108
Which of the following are the MOST logical reasons for providing source inspection?
I. The supplier has consistently shown poor out-going quality.
II. The key inspection points are hidden after assembly at the suppliers' plant.
III. The supplier requests the inspection to save them potential shipping expenses.
IV. The criticality of the product warrants it.
- A. I, II, III and IV
- B. II and IV only
- C. II, III and IV only
- D. I, II and IV only
正解：A
解説：
Explanation
質問 # 109
The effectiveness of corrective action can best be assessed by
- A. assuring that the appropriate processing documentation is changed to reflect the action taken
- B. redefining the applicable inspection, test, or process control requirements
- C. measuring the results of the corrective action
- D. changing the data collection system to capture the results of the corrective action
正解：C
解説：
The effectiveness of corrective action can best be assessed by measuring the results of the corrective action.
This involves evaluating whether the action taken has successfully addressed theroot cause of the problem and has led to a measurable improvement in the quality metrics or process performance.References:
* ASQ Quality Press: The Certified Quality Engineer Handbook.
* Total Quality Management by Dale H. Besterfield.
質問 # 110
The equation below represents the:
- A. Exponential probability density function.
- B. None of the above.
- C. Lognormal probability density function.
- D. Normal probability density function.
正解：B
質問 # 111
In nonparametric statistics:
I. No assumptions are made concerning the distribution from which the samples are taken.
II. The parameters of the distribution do not relate to the parameters of the sample.
III. The sample and the distribution must have no parameters in common.
- A. II and III only
- B. III only
- C. II only
- D. I only
正解：D
質問 # 112
Periodically, a sample of 20 items are randomly selected from a population that is normally distributed, the average is computed, and plotted. Which of the following statements is correct?
. The average of the logarithms of the values is lognormally distributed.
. The standard deviation of the averages is equal to the standard deviation of the individuals divided by the square root of 20.
. The variance of the averages is equal to the variance of the individuals divided by the square root of 20.
- A. I andIIIonly
- B. I andIIonly
- C. I only
- D. IIonly
正解：D
質問 # 113
A process is in control with a defect rate of 0.2%. A sampling plans calls for 30 items to be selected at random, and for the process to be shut down and corrected if any defects are found. How often will the process be shut down without a change in the defect rate?
- A. 5.83% of the time
- B. None of the above
- C. 3.91% of the time
- D. 1.22% of the time
正解：A
質問 # 114
The power of efficiency in designed experiments lies in the
- A. Hidden replication.
- B. The sequential and cyclical procedure of conjecture to design to analysis and back to conjecture.
- C. The large number of possible combinations of factors.
- D. Random order of performance.
正解：A
質問 # 115
When using a control chart, a point plotting within the limits on the chart is
- A. The equivalent of type II error.
- B. The equivalent of accepting the hypothesis that the process is in control.
- C. The equivalent of not rejecting the hypothesis that the process is in control.
- D. The equivalent of type I error.
正解：C
質問 # 116
What does a corrective action do to prevent an existing noncomformity, defect or undesirable situation from recurring?
- A. Takes repercussions against those responsible.
- B. Takes action against it.
- C. Eliminates it.
- D. Minimizes it.
正解：C
質問 # 117
......
ASQ CQE試験は、品質工学の概念に関する候補者の知識と理解をテストする175の多肢選択問題から構成されています。試験は、品質システム、製品およびプロセス設計、製品およびプロセス制御、持続的改善、量的手法とツールの5つの主要なセクションに分かれています。試験を受験するためには、品質工学の経験が少なくとも8年、または教育と経験の組み合わせが必要です。
ASQ CQE認定試験は、品質工学に関する候補者の知識を包括的に評価しています。品質管理システムの改善に取り組んでいる組織から非常に高く評価されており、候補者が品質改善プロジェクトをリードおよび管理する能力を指標としています。試験に合格した候補者は、品質への献身と専門能力開発へのコミットメントを示しています。
今すぐトップクラスを試そうCQE練習試験問題：https://www.passtest.jp/ASQ/CQE-shiken.html
実際問題を使おうCQE問題集無料サンプル問題と練習テストエンジン：https://drive.google.com/open?id=1UBYSA0mObgjXXpx-NEwAkzhny55ZdBJV