CQE試験正確な問題集、学習ノートと理論 [2024年01月]
100%高得点合格保証CQE無制限162解答
質問 # 55
Information that is received by upper management, is often distorted. Which of the following actions is effective in countering this problem?
. Stop killing the messenger.
. Establishing an open door policy.
. Practice management by walking around.
- A. IandIIonly
- B. IandIIIonly
- C. Ionly
- D. I,IIandIII
正解：D
質問 # 56
What is the highest form of partnering with employees?
- A. Stock option plans.
- B. Employee involvement.
- C. Cost reduction projects.
- D. Task teams.
正解：B
質問 # 57
If the probability of a success on a single trial is 0.2 and 3 trials are performed, what is the probability of at least one success?
- A. 0.488
- B. 0.600
- C. 0.384
- D. 0.008
正解：A
質問 # 58
Corrective action requests are primarily
- A. Issued to correct supplier deficiencies.
- B. Generated to correct auditing deficiencies.
- C. A result of nonconformances detected in the internal inspection process.
- D. Formal requests for corrective and preventive action.
正解：D
質問 # 59
If the probability of a success on a single trial is 0.2 and 3 trials are performed, what is the probability of at least one success?
- A. 0.488
- B. 0.600
- C. 0.384
- D. 0.008
正解：A
質問 # 60
Which of the following is the BEST method to developing materials for a training program on the gaps in performance?
- A. Review a record of activities.
- B. Allocate employees for training.
- C. Secure a workshop trainer.
- D. Set up a one shot case study.
正解：A
質問 # 61
Which of the following are the MOST logical reasons for providing source inspection?
I. The supplier has consistently shown poor out-going quality.
II. The key inspection points are hidden after assembly at the suppliers' plant.
III. The supplier requests the inspection to save them potential shipping expenses.
IV. The criticality of the product warrants it.
- A. II and IV only
- B. I, II and IV only
- C. I, II, III and IV
- D. II, III and IV only
正解：C
質問 # 62
Which of the following are the MOST logical reasons for providing source inspection?
I. The supplier has consistently shown poor out-going quality.
II. The key inspection points are hidden after assembly at the suppliers' plant.
III. The supplier requests the inspection to save them potential shipping expenses.
IV. The criticality of the product warrants it.
- A. II and IV only
- B. I, II and IV only
- C. I, II, III and IV
- D. II, III and IV only
正解：C
解説：
Explanation
質問 # 63
The Dodge-Romig tables are designed to minimize which of the following parameters?
- A. AOQ
- B. ATI
- C. AOQL
- D. AQL
正解：B
質問 # 64
Which of the following is the BEST method to developing materials for a training program on the gaps in performance?
- A. Review a record of activities.
- B. Allocate employees for training.
- C. Secure a workshop trainer.
- D. Set up a one shot case study.
正解：A
質問 # 65
What is the key ranking difference between the Deming philosophy and the Malcolm Baldrige award criteria?
- A. Deming prescribes "all or nothing" propositions but MBNQA ranks categories with different weights.
- B. There is no recognized rating system for the MBNQA.
- C. The MBNQA ranks "business results" and "customer focus", but Deming does not consider these items.
- D. The MBNQA has seven categories compared to Deming's 14 points.
正解：A
質問 # 66
During the performance of an audit, which of the following are key considerations?
I. What sampling plans may be necessary?
II. Is the audit schedule progressing as planned?
III. Is there a need for a technical specialist?
IV. Is the level of compliance satisfactory?
- A. I, II and III only
- B. I, II, III and IV
- C. II and IV only
- D. I and IV only
正解：C
質問 # 67
An X-bar and R chart with n=5 has been plotted for some time and has demonstrated random variation.
Upon review of the last 30 plot points, the expected number of runs around the centerline on the X-bar chart is expected to be approximately which of the following?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
質問 # 68
The probability of accepting a lot of unacceptable quality is known as
- A. 1-beta.
- B. Beta risk.
- C. Alpha risk.
- D. Producer's risk.
正解：B
質問 # 69
Of the services listed below, which one performed by design engineering is of particular interest to QA personnel?
- A. Change action.
- B. Cost reports.
- C. Rework criteria.
- D. Audit reports.
正解：A
質問 # 70
As the scatter of points about a regression line becomes less, r2 will
- A. Become smaller.
- B. Approach a value of 1.
- C. Become larger.
- D. Be unaffected.
正解：B
質問 # 71
One-way analysis of variance is MOST similar in its objectives to
- A. A test for equality of two population means.
- B. A test for equality of two sample proportions.
- C. A test of a population mean.
- D. A chi-square test for independence.
正解：A
質問 # 72
Which of the following list of basic NDT techniques are X ray types?
- A. Ultrasonic / Optical.
- B. Electromagnetic / Thermal.
- C. Radiation / Image generation.
- D. Thermal / Radiation.
正解：C
質問 # 73
The AQL for a given sampling plan is 1% this means that
- A. The producer takes a small risk of rejecting product which is 1% defective or better.
- B. All accepted lots are 1% defective or better.
- C. All lots are 1% defective or better.
- D. The average quality level of the plan is 1%.
正解：A
質問 # 74
If a distribution is skewed to the left, the median will always be
- A. An average of the mean and the mode.
- B. Greater than the mode.
- C. Between the mean and the mode.
- D. Less than the mean.
正解：C
質問 # 75
Which of the following quantitative methods does NOT apply to the assessment of actual system/ component reliability?
- A. Analysis of results of reliability demonstration tests.
- B. Statistical analysis of field test and failure data.
- C. Evaluation of laboratory test data.
- D. Statistical allocation of reliability goals.
正解：D
質問 # 76
Which of the following statements is CORRECT?
- A. The better the regression estimate, the greater the likelihood that homoscedasticity exists with therespect to the predicted variable.
- B. The higher the correlation, the better the regression estimate.
- C. Regression estimates are better made with positive correlation than with negative correlation.
- D. The lower the correlation, the greater the likelihood that homoscedasticity exists with respect to thepredicted variable.
正解：B
質問 # 77
As a commonly used problem solving technique, which of the following would be the BEST application of a Pareto chart?
I. To determine when to make proactive adjustments to a process.
II. To differentiate between major and minor problem areas.
III. To gather data and to design experimental controlled changes.
IV. To evaluate the results of other problem solving techniques upon the product or service.
- A. I and II only
- B. I, II, III and IV
- C. II and III only
- D. II and IV only
正解：D
質問 # 78
When used together for variables data, which of the following pair is the MOST useful in preparing control charts?
- A. p, n
- B. X-bar and R
- C. AQL, p-bar
- D. R, sigma
正解：B
質問 # 79
During the building phase of improvement team development, which of the following properly describes team activities?
I. The team leader is usually directive.
II. The team leader often delegates tasks.
III. Team members prioritize and perform duties.
IV. Team members are uncertain of their duties.
- A. I, II and III only
- B. II and III only
- C. I and IV only
- D. II, III and IV only
正解：C
質問 # 80
......
ASQ CQE（Certified Quality Engineer）認定試験は、品質エンジニアが自分のキャリア展望を向上させ、品質エンジニアリングの分野での専門知識を証明するためにアメリカ品質協会（ASQ）が提供するプロの認定です。この認定試験は、業界で広く認められ、高く評価されており、仲間との差別化やキャリアアップを目指す品質エンジニアには優れた選択肢です。
CQE問題集PDF、CQE最速合格したいなら：https://www.passtest.jp/ASQ/CQE-shiken.html
CQE練習試験問題集試験：https://drive.google.com/open?id=1tqOBcsv_Tdi_bjoF11QOGDocghFvT_6H